lkml.org 
[lkml]   [2019]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 1/5] mmc: mtk-sd: support "voltage-ranges" setting.
If the mtk-sd silicon is used in a context where there is no explicit
regulator, it is not currently possible to specify the voltage
ranges. This is true for the MT7621 MIPS Soc.

So add a called to mmc_of_parse_voltage() so that voltage-ranges can
be given.

Signed-off-by: NeilBrown <neil@brown.name>
---
Documentation/devicetree/bindings/mmc/mtk-sd.txt | 6 ++++--
drivers/mmc/host/mtk-sd.c | 3 +++
2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
index f5bcda3980cc..ed61cd5a5b8f 100644
--- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
+++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
@@ -27,10 +27,12 @@ Required properties:
- pinctrl-names: should be "default", "state_uhs"
- pinctrl-0: should contain default/high speed pin ctrl
- pinctrl-1: should contain uhs mode pin ctrl
-- vmmc-supply: power to the Core
-- vqmmc-supply: power to the IO

Optional properties:
+- vmmc-supply: power to the Core
+- vqmmc-supply: power to the IO
+- voltage-ranges: if vmmc-supply not present, this can specify pairs
+ of millivolt numbers to describe available ranged.
- assigned-clocks: PLL of the source clock
- assigned-clock-parents: parent of source clock, used for HS400 mode to get 400Mhz source clock
- hs400-ds-delay: HS400 DS delay setting
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 0798f0ba6d34..4492a4465c0e 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -2125,6 +2125,9 @@ static int msdc_drv_probe(struct platform_device *pdev)
ret = mmc_of_parse(mmc);
if (ret)
goto host_free;
+ ret = mmc_of_parse_voltage(pdev->dev.of_node, &mmc->ocr_avail);
+ if (ret < 0)
+ goto host_free;

res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
host->base = devm_ioremap_resource(&pdev->dev, res);

\
 
 \ /
  Last update: 2019-04-16 06:48    [W:0.073 / U:1.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site