lkml.org 
[lkml]   [2019]   [Apr]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 10/11] platform/x86: asus-wmi: Switch fan boost mode
On Thu, Apr 11, 2019 at 1:47 PM Yurii Pavlovskyi
<yurii.pavlovskyi@gmail.com> wrote:
> * 0x00 - is normal,
> * 0x01 - is obviously turbo by the amount of noise, might be useful to
> avoid CPU frequency throttling on high load,
> * 0x02 - the meaning is unknown at the time as modes are not named
> in the vendor documentation, but it does look like a quiet mode as CPU
> temperature does increase about 10 degrees on maximum load.

I'm curious which vendor documentation you're working with here.

From the spec,
0 = normal
1 = overboost
2 = silent

Also you can use DSTS on the 0x00110018 device to check the exact
capabilities supported, which you should use to refine which modes can
be cycled through.
Bit 0 = overboost supported
Bit 1 = silent supported

Thanks
Daniel

\
 
 \ /
  Last update: 2019-04-12 10:04    [W:0.086 / U:8.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site