lkml.org 
[lkml]   [2019]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/4] mtd: rawnand: meson: only initialize the RB completion once
Date
Documentation/scheduler/completion.txt states:
Calling init_completion() on the same completion object twice is
most likely a bug as it re-initializes the queue to an empty queue and
enqueued tasks could get "lost" - use reinit_completion() in that case,
but be aware of other races.

Initialize nfc->completion in meson_nfc_probe using init_completion and
change the call in meson_nfc_queue_rb to reinit_completion so the logic
matches what the documentation suggests.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
drivers/mtd/nand/raw/meson_nand.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index 57cc4bd3f665..ea57ddcec41e 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -400,7 +400,7 @@ static int meson_nfc_queue_rb(struct meson_nfc *nfc, int timeout_ms)
cfg |= NFC_RB_IRQ_EN;
writel(cfg, nfc->reg_base + NFC_REG_CFG);

- init_completion(&nfc->completion);
+ reinit_completion(&nfc->completion);

/* use the max erase time as the maximum clock for waiting R/B */
cmd = NFC_CMD_RB | NFC_CMD_RB_INT
@@ -1380,6 +1380,7 @@ static int meson_nfc_probe(struct platform_device *pdev)

nand_controller_init(&nfc->controller);
INIT_LIST_HEAD(&nfc->chips);
+ init_completion(&nfc->completion);

nfc->dev = dev;

--
2.21.0
\
 
 \ /
  Last update: 2019-04-12 00:01    [W:0.235 / U:5.632 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site