lkml.org 
[lkml]   [2019]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v5 9/9] clk: mediatek: Allow changing PLL rate when it is off
Date
Quoting Weiyi Lu (2019-03-04 21:05:46)
> From: James Liao <jamesjj.liao@mediatek.com>
>
> Some modules may need to change its clock rate before turn on it.
> So changing PLL's rate when it is off should be allowed.
> This patch removes PLL enabled check before set rate, so that
> PLLs can set new frequency even if they are off.
>
> On MT8173 for example, ARMPLL's enable bit can be controlled by
> other HW. That means ARMPLL may be turned on even if we (CPU / SW)
> set ARMPLL's enable bit as 0. In this case, SW may want and can
> still change ARMPLL's rate by changing its pcw and postdiv settings.
> But without this patch, new pcw setting will not be applied because
> its enable bit is 0.
>
> Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
> Acked-by: Michael Turquette <mturuqette@baylibre.com>
> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
> ---

Applied to clk-next

\
 
 \ /
  Last update: 2019-04-11 22:25    [W:0.264 / U:0.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site