lkml.org 
[lkml]   [2019]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] ACPI / LPSS: Don't skip late system PM ops for hibernate on BYT/CHT
Date
On 4/7/19 9:44 PM, Kai Heng Feng wrote:
> at 4:58 AM, Robert R. Howell <RHowell@uwyo.edu> wrote:
>
>>> On 03-04-19 07:43, Kai-Heng Feng wrote:
>>>> i2c-designware-platdrv fails to work after the system restored from
>>>> hibernation:
>> I did try applying your (Hans') patch to a 5.0.0 and a 5.1-rc3 kernel,
>> instead of what I had
>> been doing previously, which was reverting commit 02e45646d53b. I tested
>> it on an ASUS T100TA
>> and unfortunately with both kernels after resume from hibernation I still
>> get errors like those
>> listed below, and sound no longer works. I also tried applying the patch
>> from Kai-Heng Feng
>> (instead of Hans' patch or my revert) on both kernels and again in both
>> cases I get these same errors.
>
>
> Is it possible to attach full dmesg? Thanks.
>
> Kai-Heng

As I mentioned in my reply, to Hans' message, apologies again for how
long it took me to reply to both your inquiries. Besides the
inconsistency in testing the usually successful hibernation
under 5.0.0 (with my fixes), I had some strange inconsistencies in
generating dmesg output with your patch, which I've been trying to understand.

The following was generated using the 5.1-rc3 kernel with your patch applied.

What I have attached are two versions of dmesg -- one before I hibernate
the machine, and one after I resume. The reason for attaching two
is that on resume the system log is spammed with a message which
repeats every few microseconds and causes everything before it started
to scroll out of the message buffers. Therefore I don't have a record
of the hibernation itself, and I don't have a record of what transpires on
resume before the one error starts spamming the log.

I originally thought I had recorded a version which avoided the spamming
but repeated attempts to recreate that have failed and I've slowly concluded
in that one test I must somehow have had booted a different test kernel
rather than the one with your patch. But even that is a little uncertain.

Besides the versions I've attached I've also tried using the "initcall_debug"
option but that log is MUCH longer and because of the spamming issue I don't
think it provides any more information.

Let me know if I can do any further tests.

Bob Howell

------Start of dmesg log before hibernation ------------------------
[ 0.000000] Linux version 5.1.0-rc3-rrh-t100-3 (rhowell@vanguard.uwyo.edu) (gcc version 7.4.0 (SUSE Linux)) #1 SMP PREEMPT Thu Apr 4 23:05:15 MDT 2019
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.1.0-rc3-rrh-t100-3 root=UUID=6bbccbe6-887d-402e-8f62-0b068702b0f3 resume=/dev/disk/by-id/mmc-SEM64G_0xd0225f8a-part5 reboot=pci,force clocksource=tsc modprobe.blacklist=mt9m114 systemd.gpt_auto=0 splash=silent quiet showopts no_console_suspend
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020100000-0x0000000078cf4fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000078cf5000-0x0000000078d24fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000078d25000-0x0000000078d53fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000078d54000-0x000000007933efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007933f000-0x0000000079b5cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000079b5d000-0x0000000079badfff] type 20
[ 0.000000] BIOS-e820: [mem 0x0000000079bae000-0x0000000079bc8fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000079bc9000-0x0000000079bc9fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000079bca000-0x0000000079bcafff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000079bcb000-0x0000000079bcbfff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000079bcc000-0x0000000079d40fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000079d41000-0x0000000079ff8fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000079ff9000-0x0000000079ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0x78d53000 ACPI 2.0=0x78d53014 ESRT=0x78d24000 SMBIOS=0x79bcb390
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. T100TA/T100TA, BIOS T100TA.307 05/09/2014
[ 0.000000] tsc: Detected 1333.000 MHz processor
[ 0.000030] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000036] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000056] last_pfn = 0x7a000 max_arch_pfn = 0x400000000
[ 0.000064] MTRR default type: uncachable
[ 0.000067] MTRR fixed ranges enabled:
[ 0.000070] 00000-9FFFF write-back
[ 0.000074] A0000-FFFFF write-protect
[ 0.000077] MTRR variable ranges enabled:
[ 0.000081] 0 base 000000000 mask FC0000000 write-back
[ 0.000085] 1 base 040000000 mask FE0000000 write-back
[ 0.000088] 2 base 060000000 mask FF0000000 write-back
[ 0.000092] 3 base 070000000 mask FF8000000 write-back
[ 0.000096] 4 base 070000000 mask FF8000000 write-back
[ 0.000099] 5 base 078000000 mask FFC000000 write-back
[ 0.000103] 6 base 07B000000 mask FFF000000 uncachable
[ 0.000107] 7 base 07AE00000 mask FFFE00000 uncachable
[ 0.000453] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.009002] esrt: ESRT header is not in the memory map.
[ 0.009033] check: Scanning 1 areas for low memory corruption
[ 0.009051] BRK [0x03601000, 0x03601fff] PGTABLE
[ 0.009058] BRK [0x03602000, 0x03602fff] PGTABLE
[ 0.009061] BRK [0x03603000, 0x03603fff] PGTABLE
[ 0.009337] BRK [0x03604000, 0x03604fff] PGTABLE
[ 0.010501] BRK [0x03605000, 0x03605fff] PGTABLE
[ 0.011145] BRK [0x03606000, 0x03606fff] PGTABLE
[ 0.012424] Secure boot could not be determined
[ 0.012427] RAMDISK: [mem 0x36ae7000-0x3756afff]
[ 0.012439] ACPI: Early table checksum verification disabled
[ 0.012447] ACPI: RSDP 0x0000000078D53014 000024 (v02 _ASUS_)
[ 0.012457] ACPI: XSDT 0x0000000078D520E8 0000CC (v01 _ASUS_ A M I 00000003 MSFT 0100000D)
[ 0.012472] ACPI: FACP 0x0000000078D4F000 00010C (v05 _ASUS_ A M I 00000003 AMI 0100000D)
[ 0.012487] ACPI: DSDT 0x0000000078D36000 00FDEF (v02 _ASUS_ Notebook 00000003 AMI 0100000D)
[ 0.012497] ACPI: TCPA 0x0000000078D51000 000032 (v02 00000000 00000000)
[ 0.012507] ACPI: UEFI 0x00000000792D8000 000042 (v01 00000000 00000000)
[ 0.012516] ACPI: DBG2 0x0000000078D50000 000072 (v00 _ASUS_ INTLDBG2 00000003 AMI 0100000D)
[ 0.012526] ACPI: HPET 0x0000000078D4E000 000038 (v01 _ASUS_ A M I 00000003 AMI 0100000D)
[ 0.012535] ACPI: LPIT 0x0000000078D4D000 000104 (v01 _ASUS_ 00000003 AMI 0100000D)
[ 0.012545] ACPI: APIC 0x0000000078D4C000 00006C (v03 _ASUS_ 00000003 AMI 0100000D)
[ 0.012555] ACPI: MCFG 0x0000000078D4B000 00003C (v01 _ASUS_ 00000003 AMI 0100000D)
[ 0.012564] ACPI: SSDT 0x0000000078D4A000 0005FB (v01 _ASUS_ CpuDptf 00000003 AMI 0100000D)
[ 0.012574] ACPI: SSDT 0x0000000078D48000 001A07 (v01 _ASUS_ DptfTab 00000003 AMI 0100000D)
[ 0.012583] ACPI: SSDT 0x0000000078D47000 000058 (v01 _ASUS_ LowPwrM 00000003 AMI 0100000D)
[ 0.012593] ACPI: SSDT 0x0000000078D46000 0000FF (v01 _ASUS_ SoCDptf 00000003 AMI 0100000D)
[ 0.012603] ACPI: FPDT 0x0000000078D35000 000044 (v01 A M I ALASKA 01072009 AMI 00010013)
[ 0.012612] ACPI: SSDT 0x0000000078D34000 000763 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.012622] ACPI: SSDT 0x0000000078D33000 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
[ 0.012632] ACPI: SSDT 0x0000000078D32000 00017A (v01 PmRef ApTst 00003000 INTL 20061109)
[ 0.012642] ACPI: SSDT 0x0000000078D31000 000427 (v01 Intel_ Tpm2Tabl 00001000 INTL 20061109)
[ 0.012651] ACPI: TPM2 0x0000000078D30000 000034 (v03 00000000 00000000)
[ 0.012661] ACPI: BGRT 0x0000000078D2F000 000038 (v00 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.012671] ACPI: CSRT 0x0000000078D2E000 00014C (v00 ALASKA A M I 00000005 MSFT 0100000D)
[ 0.012680] ACPI: MSDM 0x0000000078D23F90 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
[ 0.012705] ACPI: Local APIC address 0xfee00000
[ 0.012760] Zone ranges:
[ 0.012763] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.012767] DMA32 [mem 0x0000000001000000-0x0000000079ffffff]
[ 0.012770] Normal empty
[ 0.012773] Movable zone start for each node
[ 0.012774] Early memory node ranges
[ 0.012777] node 0: [mem 0x0000000000001000-0x000000000008efff]
[ 0.012780] node 0: [mem 0x0000000000090000-0x000000000009dfff]
[ 0.012783] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.012786] node 0: [mem 0x0000000020100000-0x0000000078cf4fff]
[ 0.012789] node 0: [mem 0x0000000079bae000-0x0000000079bc8fff]
[ 0.012791] node 0: [mem 0x0000000079bca000-0x0000000079bcafff]
[ 0.012794] node 0: [mem 0x0000000079bcc000-0x0000000079d40fff]
[ 0.012797] node 0: [mem 0x0000000079ff9000-0x0000000079ffffff]
[ 0.013095] Zeroed struct page in unavailable ranges: 4823 pages
[ 0.013100] Initmem setup node 0 [mem 0x0000000000001000-0x0000000079ffffff]
[ 0.013105] On node 0 totalpages: 494889
[ 0.013108] DMA zone: 64 pages used for memmap
[ 0.013110] DMA zone: 22 pages reserved
[ 0.013113] DMA zone: 3996 pages, LIFO batch:0
[ 0.013392] DMA32 zone: 7744 pages used for memmap
[ 0.013395] DMA32 zone: 490893 pages, LIFO batch:63
[ 0.046731] x86/hpet: Will disable the HPET for this platform because it's not reliable
[ 0.046742] Reserving Intel graphics memory at [mem 0x7af00000-0x7eefffff]
[ 0.046811] ACPI: Local APIC address 0xfee00000
[ 0.046839] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-86
[ 0.046846] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.046852] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.046857] Using ACPI (MADT) for SMP configuration information
[ 0.046862] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.046890] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.046964] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.046970] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[ 0.046976] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.046978] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.046985] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
[ 0.046991] PM: Registered nosave memory: [mem 0x78cf5000-0x78d24fff]
[ 0.046993] PM: Registered nosave memory: [mem 0x78d25000-0x78d53fff]
[ 0.046996] PM: Registered nosave memory: [mem 0x78d54000-0x7933efff]
[ 0.046998] PM: Registered nosave memory: [mem 0x7933f000-0x79b5cfff]
[ 0.047000] PM: Registered nosave memory: [mem 0x79b5d000-0x79badfff]
[ 0.047007] PM: Registered nosave memory: [mem 0x79bc9000-0x79bc9fff]
[ 0.047013] PM: Registered nosave memory: [mem 0x79bcb000-0x79bcbfff]
[ 0.047019] PM: Registered nosave memory: [mem 0x79d41000-0x79ff8fff]
[ 0.047024] [mem 0x7ef00000-0xe00f7fff] available for PCI devices
[ 0.047027] Booting paravirtualized kernel on bare hardware
[ 0.047035] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.297675] random: get_random_bytes called from start_kernel+0x8a/0x480 with crng_init=0
[ 0.297705] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.298555] percpu: Embedded 44 pages/cpu @(____ptrval____) s139736 r8192 d32296 u524288
[ 0.298581] pcpu-alloc: s139736 r8192 d32296 u524288 alloc=1*2097152
[ 0.298584] pcpu-alloc: [0] 0 1 2 3
[ 0.298657] Built 1 zonelists, mobility grouping on. Total pages: 487059
[ 0.298664] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.1.0-rc3-rrh-t100-3 root=UUID=6bbccbe6-887d-402e-8f62-0b068702b0f3 resume=/dev/disk/by-id/mmc-SEM64G_0xd0225f8a-part5 reboot=pci,force clocksource=tsc modprobe.blacklist=mt9m114 systemd.gpt_auto=0 splash=silent quiet showopts no_console_suspend
[ 0.299739] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.300079] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.320312] Memory: 1862744K/1979556K available (10243K kernel code, 1041K rwdata, 3292K rodata, 1096K init, 1724K bss, 116812K reserved, 0K cma-reserved)
[ 0.320639] Kernel/User page tables isolation: enabled
[ 0.320883] rcu: Preemptible hierarchical RCU implementation.
[ 0.320887] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.320890] Tasks RCU enabled.
[ 0.320893] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.320895] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.321279] NR_IRQS: 4352, nr_irqs: 1024, preallocated irqs: 0
[ 0.321693] Console: colour dummy device 80x25
[ 0.321703] printk: console [tty0] enabled
[ 0.321725] ACPI: Core revision 20190215
[ 0.322249] APIC: Switch to symmetric I/O mode setup
[ 0.322304] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1336e3dbd1a, max_idle_ns: 440795236868 ns
[ 0.322335] Calibrating delay loop (skipped), value calculated using timer frequency.. 2666.00 BogoMIPS (lpj=1333000)
[ 0.322341] pid_max: default: 32768 minimum: 301
[ 0.323311] LSM: Security Framework initializing
[ 0.323311] AppArmor: AppArmor initialized
[ 0.323311] TOMOYO Linux initialized
[ 0.323311] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.323311] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.323311] *** VALIDATE proc ***
[ 0.323311] *** VALIDATE cgroup1 ***
[ 0.323311] *** VALIDATE cgroup2 ***
[ 0.323311] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.323311] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.323311] mce: CPU supports 6 MCE banks
[ 0.323311] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.323311] process: using mwait in idle threads
[ 0.323311] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[ 0.323311] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[ 0.323311] Spectre V2 : Mitigation: Full generic retpoline
[ 0.323311] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.323311] Freeing SMP alternatives memory: 16K
[ 0.323311] TSC deadline timer enabled
[ 0.323311] smpboot: CPU0: Intel(R) Atom(TM) CPU Z3740 @ 1.33GHz (family: 0x6, model: 0x37, stepping: 0x3)
[ 0.328342] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[ 0.328370] ... version: 3
[ 0.328372] ... bit width: 40
[ 0.328374] ... generic registers: 2
[ 0.328377] ... value mask: 000000ffffffffff
[ 0.328379] ... max period: 0000007fffffffff
[ 0.328381] ... fixed-purpose events: 3
[ 0.328383] ... event mask: 0000000700000003
[ 0.330325] rcu: Hierarchical SRCU implementation.
[ 0.334515] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.336337] smp: Bringing up secondary CPUs ...
[ 0.344411] x86: Booting SMP configuration:
[ 0.344415] .... node #0, CPUs: #1 #2 #3
[ 0.360540] smp: Brought up 1 node, 4 CPUs
[ 0.360540] smpboot: Max logical packages: 1
[ 0.360540] smpboot: Total of 4 processors activated (10664.00 BogoMIPS)
[ 0.361897] devtmpfs: initialized
[ 0.362398] x86/mm: Memory block size: 128MB
[ 0.363562] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[ 0.363567] PM: Registering ACPI NVS region [mem 0x78d54000-0x7933efff] (6205440 bytes)
[ 0.363936] PM: Registering ACPI NVS region [mem 0x79d41000-0x79ff8fff] (2850816 bytes)
[ 0.364382] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.364382] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.364506] pinctrl core: initialized pinctrl subsystem
[ 0.365086] NET: Registered protocol family 16
[ 0.365444] audit: initializing netlink subsys (disabled)
[ 0.365485] audit: type=2000 audit(1555008588.043:1): state=initialized audit_enabled=0 res=1
[ 0.365639] cpuidle: using governor ladder
[ 0.365659] cpuidle: using governor menu
[ 0.366355] ACPI: bus type PCI registered
[ 0.366359] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.366541] PCI: Using configuration type 1 for base access
[ 0.372439] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.373448] ACPI: Added _OSI(Module Device)
[ 0.373451] ACPI: Added _OSI(Processor Device)
[ 0.373454] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.373457] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.373461] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.373464] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.373468] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.432321] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.446539] ACPI: Dynamic OEM Table Load:
[ 0.446560] ACPI: SSDT 0xFFFF888076028000 000353 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.448334] ACPI: Dynamic OEM Table Load:
[ 0.448352] ACPI: SSDT 0xFFFF88807604E800 000442 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.451184] ACPI: Dynamic OEM Table Load:
[ 0.451201] ACPI: SSDT 0xFFFF888076029A00 00015F (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.452400] ACPI: Dynamic OEM Table Load:
[ 0.452416] ACPI: SSDT 0xFFFF888076026840 00008D (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.459481] ACPI: Interpreter enabled
[ 0.459539] ACPI: (supports S0)
[ 0.459543] ACPI: Using IOAPIC for interrupt routing
[ 0.459676] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.469220] ACPI: Power Resource [USBC] (on)
[ 0.480999] ACPI: Power Resource [PLPE] (on)
[ 0.498807] ACPI: Power Resource [CLK0] (on)
[ 0.498983] ACPI: Power Resource [CLK1] (on)
[ 0.499469] ACPI: Power Resource [P28X] (off)
[ 0.499644] ACPI: Power Resource [P18X] (off)
[ 0.502052] ACPI: Power Resource [TCPR] (off)
[ 0.507025] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.516636] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.516655] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.516910] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.518773] PCI host bridge to bus 0000:00
[ 0.518781] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 0.518786] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 0.518791] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 0.518796] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.518801] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.518806] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.518811] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[ 0.518816] pci_bus 0000:00: root bus resource [mem 0x90c00000-0x90ffffff window]
[ 0.518820] pci_bus 0000:00: root bus resource [mem 0x7af00001-0x7ef00000 window]
[ 0.518829] pci_bus 0000:00: root bus resource [mem 0x80000000-0x908ffffe window]
[ 0.518834] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff window]
[ 0.518839] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.518857] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[ 0.519226] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[ 0.519249] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff]
[ 0.519265] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
[ 0.519281] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x1007]
[ 0.519311] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.519663] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[ 0.519693] pci 0000:00:14.0: reg 0x10: [mem 0x90800000-0x9080ffff 64bit]
[ 0.519777] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.520106] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[ 0.520137] pci 0000:00:1a.0: reg 0x10: [mem 0x90700000-0x907fffff]
[ 0.520152] pci 0000:00:1a.0: reg 0x14: [mem 0x90600000-0x906fffff]
[ 0.520258] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.520586] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[ 0.520973] pci_bus 0000:00: on NUMA node 0
[ 0.522326] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.522706] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.523084] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.523465] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.523842] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.524217] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.524597] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.524980] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.528589] gpio gpiochip1: (INT33FC:01): detected irqchip that is shared with multiple gpiochips: please fix the driver.
[ 0.530359] gpio gpiochip2: (INT33FC:02): detected irqchip that is shared with multiple gpiochips: please fix the driver.
[ 0.571692] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[ 0.595668] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[ 0.596201] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.596201] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.596201] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.596201] vgaarb: loaded
[ 0.596488] SCSI subsystem initialized
[ 0.596617] libata version 3.00 loaded.
[ 0.596617] ACPI: bus type USB registered
[ 0.596617] usbcore: registered new interface driver usbfs
[ 0.596617] usbcore: registered new interface driver hub
[ 0.596617] usbcore: registered new device driver usb
[ 0.706320] random: fast init done
[ 0.877415] pps_core: LinuxPPS API ver. 1 registered
[ 0.877419] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.877430] PTP clock support registered
[ 0.877459] EDAC MC: Ver: 3.0.0
[ 0.877649] Registered efivars operations
[ 0.882465] PCI: Using ACPI for IRQ routing
[ 0.882465] PCI: pci_cache_line_size set to 64 bytes
[ 0.882465] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[ 0.882465] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 0.882465] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.882465] e820: reserve RAM buffer [mem 0x78cf5000-0x7bffffff]
[ 0.882465] e820: reserve RAM buffer [mem 0x79bc9000-0x7bffffff]
[ 0.882465] e820: reserve RAM buffer [mem 0x79bcb000-0x7bffffff]
[ 0.882465] e820: reserve RAM buffer [mem 0x79d41000-0x7bffffff]
[ 0.882465] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
[ 0.882771] NetLabel: Initializing
[ 0.882774] NetLabel: domain hash size = 128
[ 0.882776] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.882827] NetLabel: unlabeled traffic allowed by default
[ 0.883323] clocksource: Switched to clocksource tsc-early
[ 0.907673] VFS: Disk quotas dquot_6.6.0
[ 0.907725] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.907809] *** VALIDATE hugetlbfs ***
[ 0.908136] AppArmor: AppArmor Filesystem Enabled
[ 0.908196] pnp: PnP ACPI init
[ 0.908399] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.909143] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.909150] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.909156] system 00:01: [io 0x0500-0x05fe] has been reserved
[ 0.909161] system 00:01: [io 0x0600-0x061f] has been reserved
[ 0.909167] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.909185] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.911899] system 00:02: [io 0x0240-0x0259] has been reserved
[ 0.911916] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.922868] pnp: PnP ACPI: found 3 devices
[ 0.928945] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 0.928952] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 0.928957] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 0.928961] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.928966] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.928971] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.928975] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[ 0.928980] pci_bus 0000:00: resource 11 [mem 0x90c00000-0x90ffffff window]
[ 0.928985] pci_bus 0000:00: resource 12 [mem 0x7af00001-0x7ef00000 window]
[ 0.928990] pci_bus 0000:00: resource 13 [mem 0x80000000-0x908ffffe window]
[ 0.928994] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed40fff window]
[ 0.929287] NET: Registered protocol family 2
[ 0.929765] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
[ 0.929787] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.929861] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.929979] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.930074] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.930101] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.930277] NET: Registered protocol family 1
[ 0.930357] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.930909] PCI: CLS 0 bytes, default 64
[ 0.931057] Unpacking initramfs...
[ 3.852552] Freeing initrd memory: 10768K
[ 3.852967] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1336e3dbd1a, max_idle_ns: 440795236868 ns
[ 3.853005] clocksource: Switched to clocksource tsc
[ 3.853228] check: Scanning for low memory corruption every 60 seconds
[ 3.855015] Initialise system trusted keyrings
[ 3.855144] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 3.855289] zbud: loaded
[ 3.948925] Key type asymmetric registered
[ 3.948930] Asymmetric key parser 'x509' registered
[ 3.948932] Key type pkcs7_test registered
[ 3.948973] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 3.949117] io scheduler mq-deadline registered
[ 3.949121] io scheduler kyber registered
[ 3.949730] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.949951] efifb: probing for efifb
[ 3.949988] efifb: showing boot graphics
[ 3.952766] efifb: framebuffer at 0x80000000, using 4160k, total 4160k
[ 3.952770] efifb: mode is 1368x768x32, linelength=5504, pages=1
[ 3.952772] efifb: scrolling: redraw
[ 3.952776] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 3.952930] fbcon: Deferring console take-over
[ 3.952934] fb0: EFI VGA frame buffer device
[ 3.952963] intel_idle: MWAIT substates: 0x33000020
[ 3.952967] intel_idle: v0.4.1 model 0x37
[ 3.953633] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 3.964136] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
[ 3.984681] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 4.026932] hpet: number irqs doesn't agree with number of timers
[ 4.028564] Non-volatile memory driver v1.3
[ 4.029442] Linux agpgart interface v0.103
[ 4.060896] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.060938] ehci-pci: EHCI PCI platform driver
[ 4.061000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.061051] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.061360] i8042: PNP: No PS/2 controller found.
[ 4.063158] mousedev: PS/2 mouse device common for all mice
[ 4.064395] intel_pstate: Intel P-state driver initializing
[ 4.066663] ledtrig-cpu: registered to indicate activity on CPUs
[ 4.066800] EFI Variables Facility v0.08 2004-May-17
[ 4.079887] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.080621] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4001:00/input/input0
[ 4.086281] intel_telemetry_core Init
[ 4.087539] NET: Registered protocol family 10
[ 4.090616] Segment Routing with IPv6
[ 4.095059] microcode: sig=0x30673, pf=0x2, revision=0x31e
[ 4.096189] microcode: Microcode Update Driver: v2.2.
[ 4.096250] sched_clock: Marking stable (4095173079, 973361)->(4107253782, -11107342)
[ 4.098441] registered taskstats version 1
[ 4.098452] Loading compiled-in X.509 certificates
[ 4.098543] zswap: loaded using pool lzo/zbud
[ 4.099305] AppArmor: AppArmor sha1 policy hashing enabled
[ 4.101176] hctosys: unable to open rtc device (rtc0)
[ 4.105596] Freeing unused kernel image memory: 1096K
[ 4.112698] Write protecting the kernel read-only data: 16384k
[ 4.117461] Freeing unused kernel image memory: 2028K
[ 4.119670] Freeing unused kernel image memory: 804K
[ 4.120426] Run /init as init process
[ 4.183048] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid)
[ 4.196308] systemd[1]: Detected architecture x86-64.
[ 4.196404] systemd[1]: Running in initial RAM disk.
[ 4.196600] systemd[1]: Set hostname to <elsie>.
[ 4.429250] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.429354] systemd[1]: Listening on udev Kernel Socket.
[ 4.429496] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.429602] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.429637] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.430565] systemd[1]: Created slice System Slice.
[ 4.430715] systemd[1]: Listening on udev Control Socket.
[ 4.430766] systemd[1]: Reached target Timers.
[ 4.431090] systemd[1]: Created slice system-systemd\x2dhibernate\x2dresume.slice.
[ 4.452097] device-mapper: uevent: version 1.0.3
[ 4.454641] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[ 4.466994] fbcon: Taking over console
[ 4.469498] Console: switching to colour frame buffer device 171x48
[ 5.048804] random: crng init done
[ 5.048808] random: 7 urandom warning(s) missed due to ratelimiting
[ 5.253266] sdhci: Secure Digital Host Controller Interface driver
[ 5.253270] sdhci: Copyright(c) Pierre Ossman
[ 5.257710] 80860F0A:00: ttyS4 at MMIO 0x9094d000 (irq = 17, base_baud = 2764800) is a 16550A
[ 5.257899] serial serial0: tty port ttyS4 registered
[ 5.272662] mmc0: SDHCI controller on ACPI [80860F14:01] using ADMA
[ 5.274717] mmc1: SDHCI controller on ACPI [INT33BB:00] using ADMA
[ 5.277214] ACPI Debug: "Method _DSM begin"
[ 5.281262] ACPI Debug: "Method _DSM Function HID"
[ 5.281354] i2c_hid i2c-ATML1000:00: i2c-ATML1000:00 supply vdd not found, using dummy regulator
[ 5.281397] i2c_hid i2c-ATML1000:00: i2c-ATML1000:00 supply vddl not found, using dummy regulator
[ 5.287340] mmc2: SDHCI controller on ACPI [80860F14:00] using ADMA
[ 5.316716] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 5.316735] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 5.317828] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[ 5.317835] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 5.318778] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
[ 5.318783] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.318786] usb usb1: Product: xHCI Host Controller
[ 5.318789] usb usb1: Manufacturer: Linux 5.1.0-rc3-rrh-t100-3 xhci-hcd
[ 5.318791] usb usb1: SerialNumber: 0000:00:14.0
[ 5.320733] hub 1-0:1.0: USB hub found
[ 5.320760] hub 1-0:1.0: 6 ports detected
[ 5.322295] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 5.322307] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 5.322338] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 5.322464] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.01
[ 5.322468] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.322471] usb usb2: Product: xHCI Host Controller
[ 5.322474] usb usb2: Manufacturer: Linux 5.1.0-rc3-rrh-t100-3 xhci-hcd
[ 5.322477] usb usb2: SerialNumber: 0000:00:14.0
[ 5.325530] hub 2-0:1.0: USB hub found
[ 5.325557] hub 2-0:1.0: 1 port detected
[ 5.335296] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 5.336809] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 5.338353] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 5.341424] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 5.380696] mmc2: new HS200 MMC card at address 0001
[ 5.385345] checking generic (80000000 410000) vs hw (80000000 10000000)
[ 5.385350] fb0: switching to inteldrmfb from EFI VGA
[ 5.385395] Console: switching to colour dummy device 80x25
[ 5.386268] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 5.386471] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.386474] [drm] Driver supports precise vblank timestamp query.
[ 5.387961] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 5.408977] mmc1: new ultra high speed DDR50 SDIO card at address 0001
[ 5.410209] [drm] Initialized i915 1.6.0 20190207 for 0000:00:02.0 on minor 0
[ 5.415478] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 5.418696] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input1
[ 5.418984] [drm] HDaudio controller not detected, using LPE audio instead
[ 5.421082] fbcon: inteldrmfb (fb0) is primary device
[ 5.431977] mmcblk2: mmc2:0001 SEM64G 58.2 GiB
[ 5.432651] mmcblk2boot0: mmc2:0001 SEM64G partition 1 4.00 MiB
[ 5.433300] mmcblk2boot1: mmc2:0001 SEM64G partition 2 4.00 MiB
[ 5.433660] mmcblk2rpmb: mmc2:0001 SEM64G partition 3 4.00 MiB, chardev (244:0)
[ 5.438730] mmcblk2: p1 p2 p3 p4 p5 p6
[ 5.466393] input: ATML1000:00 03EB:8C0D Touchscreen as /devices/platform/80860F41:05/i2c-5/i2c-ATML1000:00/0018:03EB:8C0D.0001/input/input2
[ 5.466950] hid-generic 0018:03EB:8C0D.0001: input,hidraw0: I2C HID v1.00 Device [ATML1000:00 03EB:8C0D] on i2c-ATML1000:00
[ 5.478797] mmc0: new high speed SDXC card at address aaaa
[ 5.481488] mmcblk0: mmc0:aaaa SL64G 59.5 GiB
[ 5.495830] mmcblk0: p1
[ 5.646565] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 5.780895] usb 1-3: New USB device found, idVendor=0b05, idProduct=17e0, bcdDevice= 2.35
[ 5.780911] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.780921] usb 1-3: Product: ASUS Base Station(T100)
[ 5.780929] usb 1-3: Manufacturer: ASUSTek COMPUTER INC.
[ 5.795734] input: ASUSTek COMPUTER INC. ASUS Base Station(T100) as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:0B05:17E0.0002/input/input4
[ 5.849861] hid-generic 0003:0B05:17E0.0002: input,hidraw1: USB HID v1.11 Keyboard [ASUSTek COMPUTER INC. ASUS Base Station(T100)] on usb-0000:00:14.0-3/input0
[ 5.853721] input: ASUSTek COMPUTER INC. ASUS Base Station(T100) Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:0B05:17E0.0003/input/input5
[ 5.907305] input: ASUSTek COMPUTER INC. ASUS Base Station(T100) System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:0B05:17E0.0003/input/input6
[ 5.908068] input: ASUSTek COMPUTER INC. ASUS Base Station(T100) as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:0B05:17E0.0003/input/input7
[ 5.909385] hid-generic 0003:0B05:17E0.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [ASUSTek COMPUTER INC. ASUS Base Station(T100)] on usb-0000:00:14.0-3/input1
[ 5.912956] input: ASUSTek COMPUTER INC. ASUS Base Station(T100) Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:0B05:17E0.0004/input/input8
[ 5.914232] hid-generic 0003:0B05:17E0.0004: input,hiddev97,hidraw3: USB HID v1.11 Mouse [ASUSTek COMPUTER INC. ASUS Base Station(T100)] on usb-0000:00:14.0-3/input2
[ 5.914622] usbcore: registered new interface driver usbhid
[ 5.914628] usbhid: USB HID core driver
[ 5.942525] asus_wmi: ASUS WMI generic driver loaded
[ 6.000012] input: ASUSTek COMPUTER INC. ASUS Base Station(T100) as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:0B05:17E0.0002/input/input10
[ 6.052868] asus 0003:0B05:17E0.0002: input,hidraw0: USB HID v1.11 Keyboard [ASUSTek COMPUTER INC. ASUS Base Station(T100)] on usb-0000:00:14.0-3/input0
[ 6.118391] input: ATML1000:00 03EB:8C0D as /devices/platform/80860F41:05/i2c-5/i2c-ATML1000:00/0018:03EB:8C0D.0001/input/input11
[ 6.124537] hid-multitouch 0018:03EB:8C0D.0001: input,hidraw1: I2C HID v1.00 Device [ATML1000:00 03EB:8C0D] on i2c-ATML1000:00
[ 6.125477] asus 0003:0B05:17E0.0003: Fixing up Asus T100 keyb report descriptor
[ 6.126013] input: ASUSTek COMPUTER INC. ASUS Base Station(T100) as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:0B05:17E0.0003/input/input13
[ 6.145885] input: ASUSTek COMPUTER INC. ASUS Base Station(T100) as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:0B05:17E0.0004/input/input14
[ 6.197729] asus 0003:0B05:17E0.0004: input,hiddev97,hidraw2: USB HID v1.11 Mouse [ASUSTek COMPUTER INC. ASUS Base Station(T100)] on usb-0000:00:14.0-3/input2
[ 6.198990] asus 0003:0B05:17E0.0003: input,hiddev96,hidraw3: USB HID v1.11 Device [ASUSTek COMPUTER INC. ASUS Base Station(T100)] on usb-0000:00:14.0-3/input1
[ 6.205416] Console: switching to colour frame buffer device 171x48
[ 6.254589] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 6.360362] PM: Image not found (code -22)
[ 6.441718] EXT4-fs (mmcblk2p6): mounted filesystem with ordered data mode. Opts: (null)
[ 7.073681] systemd-journald[131]: Received SIGTERM from PID 1 (systemd).
[ 7.148096] printk: systemd: 19 output lines suppressed due to ratelimiting
[ 8.215768] EXT4-fs (mmcblk2p6): re-mounted. Opts: acl,user_xattr
[ 8.299500] systemd-journald[326]: Received request to flush runtime journal from PID 1
[ 8.584505] audit: type=1400 audit(1555008596.261:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ping" pid=356 comm="apparmor_parser"
[ 8.667049] audit: type=1400 audit(1555008596.343:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="klogd" pid=366 comm="apparmor_parser"
[ 8.722615] audit: type=1400 audit(1555008596.399:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="syslog-ng" pid=373 comm="apparmor_parser"
[ 8.771981] audit: type=1400 audit(1555008596.448:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="syslogd" pid=380 comm="apparmor_parser"
[ 8.914625] audit: type=1400 audit(1555008596.591:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lessopen.sh" pid=389 comm="apparmor_parser"
[ 9.152476] audit: type=1400 audit(1555008596.828:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/apache2/mpm-prefork/apache2" pid=410 comm="apparmor_parser"
[ 9.152484] audit: type=1400 audit(1555008596.828:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=410 comm="apparmor_parser"
[ 9.152487] audit: type=1400 audit(1555008596.828:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/apache2/mpm-prefork/apache2//HANDLING_UNTRUSTED_INPUT" pid=410 comm="apparmor_parser"
[ 9.152491] audit: type=1400 audit(1555008596.828:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/apache2/mpm-prefork/apache2//phpsysinfo" pid=410 comm="apparmor_parser"
[ 9.199038] battery: ACPI: Battery Slot [BATC] (battery present)
[ 9.273934] audit: type=1400 audit(1555008596.950:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/dovecot/anvil" pid=418 comm="apparmor_parser"
[ 9.286623] ACPI: AC Adapter [ADP1] (on-line)
[ 9.431958] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input15
[ 9.432114] ACPI: Lid Switch [LID]
[ 9.432265] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input16
[ 9.432396] ACPI: Sleep Button [SLPB]
[ 9.458503] rtc_cmos 00:00: registered as rtc0
[ 9.458553] rtc_cmos 00:00: no alarms, 242 bytes nvram
[ 9.520126] [Firmware Bug]: No valid trip found
[ 9.521216] Bluetooth: Core ver 2.22
[ 9.521276] NET: Registered protocol family 31
[ 9.521278] Bluetooth: HCI device and connection manager initialized
[ 9.521287] Bluetooth: HCI socket layer initialized
[ 9.521292] Bluetooth: L2CAP socket layer initialized
[ 9.521304] Bluetooth: SCO socket layer initialized
[ 9.546571] inv-mpu6050-i2c i2c-INVN6500:00: mounting matrix not found: using identity...
[ 9.546584] inv-mpu6050-i2c i2c-INVN6500:00: i2c-INVN6500:00 supply vddio not found, using dummy regulator
[ 9.567357] input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=0 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input17
[ 9.568772] input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=1 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input18
[ 9.700587] Bluetooth: HCI UART driver ver 2.3
[ 9.700592] Bluetooth: HCI UART protocol H4 registered
[ 9.700594] Bluetooth: HCI UART protocol BCSP registered
[ 9.700637] Bluetooth: HCI UART protocol LL registered
[ 9.700639] Bluetooth: HCI UART protocol ATH3K registered
[ 9.700665] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 9.700797] Bluetooth: HCI UART protocol Intel registered
[ 9.700933] Bluetooth: HCI UART protocol Broadcom registered
[ 9.700956] Bluetooth: HCI UART protocol QCA registered
[ 9.700959] Bluetooth: HCI UART protocol AG6XX registered
[ 9.712544] hci_uart_bcm serial0-0: ACPI Interrupt resource is active-high, this is usually wrong, treating the IRQ as active-low
[ 9.712823] hci_uart_bcm serial0-0: serial0-0 supply vbat not found, using dummy regulator
[ 9.712872] hci_uart_bcm serial0-0: serial0-0 supply vddio not found, using dummy regulator
[ 9.750726] i2c i2c-4: Added multiplexed i2c bus 14
[ 9.762042] ak8975 14-000c: mounting matrix not found: using identity...
[ 9.762053] ak8975 14-000c: 14-000c supply vdd not found, using dummy regulator
[ 9.762097] ak8975 14-000c: 14-000c supply vid not found, using dummy regulator
[ 9.763167] intel_sst_acpi 80860F28:00: BYT-CR not detected
[ 9.763374] intel_sst_acpi 80860F28:00: LPE base: 0x90a00000 size:0x200000
[ 9.763378] intel_sst_acpi 80860F28:00: IRAM base: 0x90ac0000
[ 9.763430] intel_sst_acpi 80860F28:00: DRAM base: 0x90b00000
[ 9.763440] intel_sst_acpi 80860F28:00: SHIM base: 0x90b40000
[ 9.763450] intel_sst_acpi 80860F28:00: Mailbox base: 0x90b44000
[ 9.763458] intel_sst_acpi 80860F28:00: DDR base: 0x20000000
[ 9.763618] intel_sst_acpi 80860F28:00: Got drv data max stream 25
[ 9.915419] Bluetooth: hci0: BCM: chip id 84
[ 9.916109] Bluetooth: hci0: BCM: features 0x0f
[ 9.917304] Bluetooth: hci0: BCM4324B3
[ 9.917311] Bluetooth: hci0: BCM4324B3 (002.004.006) build 0000
[ 9.925706] ------------[ cut here ]------------
[ 9.925709] Potential Error: Setting GPIO with direct_irq_en to output
[ 9.925734] WARNING: CPU: 3 PID: 406 at drivers/pinctrl/intel/pinctrl-baytrail.c:1031 byt_gpio_set_direction+0x6d/0x8b
[ 9.925736] Modules linked in: asus_nb_wmi(+) snd_intel_sst_acpi ak8975 snd_intel_sst_core snd_soc_sst_atom_hifi2_platform joydev snd_soc_acpi_intel_match hci_uart snd_soc_rt5640 snd_soc_acpi snd_soc_rl6231 btqca snd_soc_core btrtl snd_hdmi_lpe_audio btbcm snd_compress ac97_bus btintel inv_mpu6050_i2c snd_pcm thermal tpm_tis bluetooth inv_mpu6050 rtc_cmos tpm_tis_core industrialio_triggered_buffer button snd_timer tpm kfifo_buf intel_int0002_vgpio soc_button_array i2c_mux snd lpc_ich acpi_pad ac ecdh_generic cm3218x soundcore industrialio battery hid_asus asus_wmi rfkill hid_multitouch usbhid mmc_block i915 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops xhci_pci drm xhci_hcd wmi video i2c_hid sdhci_acpi sdhci mmc_core 8250_dw sg dm_multipath dm_mod dax efivarfs
[ 9.925790] CPU: 3 PID: 406 Comm: systemd-udevd Not tainted 5.1.0-rc3-rrh-t100-3 #1
[ 9.925792] Hardware name: ASUSTeK COMPUTER INC. T100TA/T100TA, BIOS T100TA.307 05/09/2014
[ 9.925797] RIP: 0010:byt_gpio_set_direction+0x6d/0x8b
[ 9.925800] Code: 00 49 89 c5 41 8b 1c 24 83 e3 f9 45 84 ff 74 05 83 cb 02 eb 17 41 8b 06 0f ba e0 1b 73 0e 48 c7 c7 e3 5a e7 81 e8 73 b3 d4 ff <0f> 0b 41 89 1c 24 4c 89 ee 48 89 ef e8 62 08 34 00 31 c0 5b 5d 41
[ 9.925803] RSP: 0018:ffffc90000473520 EFLAGS: 00010096
[ 9.925805] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 9.925807] RDX: 000000024f9e5070 RSI: ffffffff8246fefa RDI: ffffffff8246da8c
[ 9.925810] RBP: ffff8880761ab208 R08: ffffffff8246fec0 R09: 000000000000003a
[ 9.925812] R10: 0000000000000008 R11: 000000056859070a R12: ffffc900000c9268
[ 9.925813] R13: 0000000000000246 R14: ffffc900000c9260 R15: 0000000000000000
[ 9.925816] FS: 00007f3703aa8d40(0000) GS:ffff888076780000(0000) knlGS:0000000000000000
[ 9.925818] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 9.925820] CR2: 00007f80176162b8 CR3: 0000000074096000 CR4: 00000000001006e0
[ 9.925822] Call Trace:
[ 9.925831] pinctrl_gpio_direction+0x5c/0x8e
[ 9.925836] byt_gpio_direction_output+0x19/0x35
[ 9.925841] gpiod_direction_output_raw_commit+0x71/0x113
[ 9.925847] gpiochip_request_own_desc+0x60/0x97
[ 9.925853] acpi_gpio_adr_space_handler+0x17d/0x279
[ 9.925860] acpi_ev_address_space_dispatch+0x2d9/0x37b
[ 9.925865] ? acpi_gpiochip_alloc_event+0x256/0x256
[ 9.925870] acpi_ex_access_region+0x434/0x4d3
[ 9.925875] ? acpi_ut_trace+0x1d/0x59
[ 9.925880] acpi_ex_write_gpio+0xdd/0x113
[ 9.925885] acpi_ex_write_data_to_field+0xcf/0x34f
[ 9.925890] acpi_ex_store_object_to_node+0x2ca/0x31f
[ 9.925894] acpi_ex_store+0xab/0x444
[ 9.925898] ? acpi_ut_trace_str+0x21/0x63
[ 9.925902] acpi_ex_opcode_1A_1T_1R+0x40e/0x596
[ 9.925907] acpi_ds_exec_end_op+0x159/0x74e
[ 9.925911] acpi_ps_parse_loop+0x7ca/0x88c
[ 9.925916] acpi_ps_parse_aml+0x1a6/0x542
[ 9.925920] acpi_ps_execute_method+0x1fc/0x2b8
[ 9.925925] acpi_ns_evaluate+0x33c/0x4cf
[ 9.925929] acpi_evaluate_object+0x1c6/0x389
[ 9.925940] wmidev_evaluate_method+0xe7/0x102 [wmi]
[ 9.925947] wmi_evaluate_method+0x5e/0x79 [wmi]
[ 9.925955] asus_wmi_evaluate_method+0x5a/0xbf [asus_wmi]
[ 9.925961] asus_wmi_probe+0xfd/0xc7a [asus_wmi]
[ 9.925969] platform_drv_probe+0x2d/0x6e
[ 9.925974] really_probe+0x1a2/0x36f
[ 9.925978] driver_probe_device+0xca/0xfa
[ 9.925983] device_driver_attach+0x38/0x4f
[ 9.925987] __driver_attach+0x100/0x108
[ 9.925991] ? device_driver_attach+0x4f/0x4f
[ 9.925994] bus_for_each_dev+0x6c/0x9e
[ 9.926000] ? do_raw_spin_lock+0x2b/0x52
[ 9.926004] bus_add_driver+0x122/0x1d1
[ 9.926009] ? pwm1_enable_store+0x78/0x78 [asus_wmi]
[ 9.926013] driver_register+0x94/0xc6
[ 9.926017] __platform_driver_probe+0x4b/0xc3
[ 9.926023] ? pwm1_enable_store+0x78/0x78 [asus_wmi]
[ 9.926026] __platform_create_bundle+0x74/0xb1
[ 9.926031] ? 0xffffffffa0099000
[ 9.926036] asus_wmi_register_driver+0x50/0x63 [asus_wmi]
[ 9.926041] do_one_initcall+0x96/0x18e
[ 9.926047] ? kmem_cache_alloc_trace+0x81/0x90
[ 9.926053] do_init_module+0x56/0x1c6
[ 9.926058] load_module+0x134b/0x1951
[ 9.926064] ? vfs_read+0xa2/0xc7
[ 9.926070] ? __do_sys_finit_module+0xae/0xd4
[ 9.926074] __do_sys_finit_module+0xae/0xd4
[ 9.926079] do_syscall_64+0x49/0x56
[ 9.926085] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 9.926088] RIP: 0033:0x7f3702912269
[ 9.926091] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ff 0b 2c 00 f7 d8 64 89 01 48
[ 9.926093] RSP: 002b:00007fffa97c7658 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 9.926096] RAX: ffffffffffffffda RBX: 0000558bc4b2c760 RCX: 00007f3702912269
[ 9.926098] RDX: 0000000000000000 RSI: 00007f370324e8bd RDI: 0000000000000007
[ 9.926100] RBP: 00007f370324e8bd R08: 0000000000000000 R09: 0000558bc4b02a20
[ 9.926102] R10: 0000000000000007 R11: 0000000000000246 R12: 0000000000020000
[ 9.926104] R13: 0000558bc4b15bf0 R14: 0000000000000000 R15: 0000000003938700
[ 9.926108] ---[ end trace 514c8a9601f10d48 ]---
[ 9.926675] asus_wmi: Initialization: 0x1
[ 9.926871] input: PC Speaker as /devices/platform/pcspkr/input/input19
[ 9.926889] asus_wmi: BIOS WMI version: 7.9
[ 9.927047] asus_wmi: SFUN value: 0x37
[ 9.960057] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input20
[ 9.961855] asus_wmi: Number of fans: 1
[ 10.022579] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 10.029965] cryptd: max_cpu_qlen set to 1000
[ 10.048067] Adding 2110460k swap on /dev/mmcblk2p5. Priority:-2 extents:1 across:2110460k SSFS
[ 10.049353] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 10.078499] SSE version of gcm_enc/dec engaged.
[ 10.212227] iTCO_vendor_support: vendor-support=0
[ 10.224656] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 10.224809] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
[ 10.238947] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 10.240568] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.242313] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 10.246660] input: gpio-keys as /devices/platform/gpio-keys.1.auto/input/input21
[ 10.246990] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 10.250354] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 10.257671] input: gpio-keys as /devices/platform/gpio-keys.2.auto/input/input22
[ 10.294392] fuse init (API version 7.29)
[ 10.343305] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43241b4-sdio for chip BCM4324/5
[ 10.343444] usbcore: registered new interface driver brcmfmac
[ 10.357998] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43241b4-sdio.ASUSTeK COMPUTER INC.-T100TA.txt failed with error -2
[ 10.358050] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43241b4-sdio.txt failed with error -2
[ 10.358206] brcmfmac: brcmf_fw_nvram_from_efi: Using nvram EFI variable
[ 10.474981] Bluetooth: hci0: BCM4324B3 (002.004.006) build 0161
[ 10.506811] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43241b4-sdio for chip BCM4324/5
[ 10.506878] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[ 10.507266] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4324/5 wl0: Jul 17 2013 07:36:07 version 6.10.197.71 (r412987) FWID 01-882d2634
[ 10.525541] bytcr_rt5640 bytcr_rt5640: quirk IN1_MAP enabled
[ 10.525546] bytcr_rt5640 bytcr_rt5640: quirk realtek,jack-detect-source 3
[ 10.525549] bytcr_rt5640 bytcr_rt5640: quirk realtek,over-current-threshold-microamp 2000
[ 10.525552] bytcr_rt5640 bytcr_rt5640: quirk realtek,over-current-scale-factor 1
[ 10.525555] bytcr_rt5640 bytcr_rt5640: quirk MCLK_EN enabled
[ 10.536684] bytcr_rt5640 bytcr_rt5640: snd-soc-dummy-dai <-> media-cpu-dai mapping ok
[ 10.536752] bytcr_rt5640 bytcr_rt5640: snd-soc-dummy-dai <-> deepbuffer-cpu-dai mapping ok
[ 10.539138] bytcr_rt5640 bytcr_rt5640: rt5640-aif1 <-> ssp2-port mapping ok
[ 10.544273] input: bytcr-rt5640 Headset as /devices/platform/80860F28:00/bytcr_rt5640/sound/card1/input23
[ 12.333585] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.333588] Bluetooth: BNEP filters: protocol multicast
[ 12.333598] Bluetooth: BNEP socket layer initialized
[ 15.229036] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 16.424182] NET: Registered protocol family 17
[ 21.388280] NET: Registered protocol family 38
[ 22.615955] input: MX Anywhere 2 Keyboard as /devices/virtual/misc/uhid/0005:046D:B013.0005/input/input24
[ 22.617490] input: MX Anywhere 2 Mouse as /devices/virtual/misc/uhid/0005:046D:B013.0005/input/input25
[ 22.618237] hid-generic 0005:046D:B013.0005: input,hidraw4: BLUETOOTH HID v0.07 Keyboard [MX Anywhere 2] on 74:D0:2B:DF:77:E9
[ 28.463197] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 38.324221] intel_sst_acpi 80860F28:00: FW Version 01.0c.00.01
[ 38.784560] Bluetooth: RFCOMM TTY layer initialized
[ 38.784574] Bluetooth: RFCOMM socket layer initialized
[ 38.784590] Bluetooth: RFCOMM ver 1.11
------End of dmesg log before hibernation ------------------------

------Start of dmesg log after hibernation resume ------------------------
[ 192.650763] i2c_designware 80860F41:02: Error i2c_dw_xfer call while suspended
[ 192.650777] i2c_designware 80860F41:02: Error i2c_dw_xfer call while suspended
[ 192.650780] i2c_designware 80860F41:02: Error i2c_dw_xfer call while suspended
[ 192.650794] i2c_designware 80860F41:02: Error i2c_dw_xfer call while suspended
... Deleted multiple identical lines
[ 192.656401] i2c_designware 80860F41:02: Error i2c_dw_xfer call while suspended
[ 192.656405] i2c_designware 80860F41:02: Error i2c_dw_xfer call while suspended
[ 192.656412] i2c_designware 80860F41:01: timeout in disabling adapter
[ 192.656419] i2c_designware 80860F41:02: Error i2c_dw_xfer call while suspended
[ 192.656423] i2c_designware 80860F41:02: Error i2c_dw_xfer call while suspended
[ 192.656437] i2c_designware 80860F41:02: Error i2c_dw_xfer call while suspended
... Deleted multiple identical lines
[ 192.656441] i2c_designware 80860F41:02: Error i2c_dw_xfer call while suspended
[ 192.668256] i2c_designware 80860F41:02: Error i2c_dw_xfer call while suspended
[ 192.668259] i2c_designware 80860F41:02: Error i2c_dw_xfer call while suspended
[ 192.668277] i2c_designware 80860F41:02: Error i2c_dw_xfer call while suspended
[ 192.668281] i2c_designware 80860F41:02: Error i2c_dw_xfer call while suspended
[ 192.668301] i2c_designware 80860F41:02: Error i2c_dw_xfer call while suspended
[ 192.791685] usb usb1: root hub lost power or was reset
[ 192.791707] usb usb2: root hub lost power or was reset
[ 192.799078] ACPI: button: The lid device is not compliant to SW_LID.
[ 192.895823] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 192.901512] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 192.907632] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 192.916305] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 193.132888] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[ 193.348820] PM: Basic memory bitmaps freed
[ 193.348831] OOM killer enabled.
[ 193.348836] Restarting tasks ... done.
[ 193.354346] PM: hibernation exit
[ 193.376657] i2c_designware 80860F41:01: timeout waiting for bus ready
[ 193.376674] rt5640 i2c-10EC5640:00: Failed to write 13d = 3600: -110
[ 193.399152] i2c_designware 80860F41:01: timeout waiting for bus ready
[ 193.426828] i2c_designware 80860F41:01: timeout waiting for bus ready
[ 193.449112] i2c_designware 80860F41:01: timeout waiting for bus ready
[ 193.471731] i2c_designware 80860F41:01: timeout waiting for bus ready
[ 193.494025] i2c_designware 80860F41:01: timeout waiting for bus ready
[ 193.516592] i2c_designware 80860F41:01: timeout waiting for bus ready
[ 194.008684] systemd-journald[326]: /dev/kmsg buffer overrun, some messages lost.
[ 194.652559] i2c_designware 80860F41:01: timeout in disabling adapter
[ 196.575683] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 196.577214] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 197.097993] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 197.099804] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 197.101633] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 197.105977] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 197.210341] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43241b4-sdio for chip BCM4324/5
[ 197.210510] usbcore: registered new interface driver brcmfmac
[ 197.248463] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43241b4-sdio.ASUSTeK COMPUTER INC.-T100TA.txt failed with error -2
[ 197.248523] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43241b4-sdio.txt failed with error -2
[ 197.248728] brcmfmac: brcmf_fw_nvram_from_efi: Using nvram EFI variable
[ 197.382866] Bluetooth: HCI UART driver ver 2.3
[ 197.382871] Bluetooth: HCI UART protocol H4 registered
[ 197.382873] Bluetooth: HCI UART protocol BCSP registered
[ 197.382928] Bluetooth: HCI UART protocol LL registered
[ 197.382931] Bluetooth: HCI UART protocol ATH3K registered
[ 197.383141] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 197.383268] Bluetooth: HCI UART protocol Intel registered
[ 197.383404] Bluetooth: HCI UART protocol Broadcom registered
[ 197.383429] Bluetooth: HCI UART protocol QCA registered
[ 197.383431] Bluetooth: HCI UART protocol AG6XX registered
[ 197.393969] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43241b4-sdio for chip BCM4324/5
[ 197.394067] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[ 197.394417] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4324/5 wl0: Jul 17 2013 07:36:07 version 6.10.197.71 (r412987) FWID 01-882d2634
[ 197.395215] hci_uart_bcm serial0-0: ACPI Interrupt resource is active-high, this is usually wrong, treating the IRQ as active-low
[ 197.395488] hci_uart_bcm serial0-0: serial0-0 supply vbat not found, using dummy regulator
[ 197.395529] hci_uart_bcm serial0-0: serial0-0 supply vddio not found, using dummy regulator
[ 197.525916] battery: ACPI: Battery Slot [BATC] (battery present)
[ 197.605088] Bluetooth: hci0: BCM: chip id 84
[ 197.605579] Bluetooth: hci0: BCM: features 0x0f
[ 197.606767] Bluetooth: hci0: BCM4324B3
[ 197.606774] Bluetooth: hci0: BCM4324B3 (002.004.006) build 0000
[ 197.780640] input: ATML1000:00 03EB:8C0D as /devices/platform/80860F41:05/i2c-5/i2c-ATML1000:00/0018:03EB:8C0D.0001/input/input29
[ 197.780914] hid-multitouch 0018:03EB:8C0D.0001: input,hidraw1: I2C HID v1.00 Device [ATML1000:00 03EB:8C0D] on i2c-ATML1000:00
[ 198.148989] Bluetooth: hci0: BCM4324B3 (002.004.006) build 0161
[ 203.133178] i2c_designware 80860F41:01: controller timed out
[ 204.156346] i2c_designware 80860F41:01: controller timed out
[ 205.180265] i2c_designware 80860F41:01: controller timed out
[ 206.204451] i2c_designware 80860F41:01: controller timed out
[ 207.228505] i2c_designware 80860F41:01: controller timed out
[ 208.252674] i2c_designware 80860F41:01: controller timed out
[ 209.277005] i2c_designware 80860F41:01: controller timed out
[ 210.300975] i2c_designware 80860F41:01: controller timed out
[ 211.325383] i2c_designware 80860F41:01: controller timed out
[ 212.349397] i2c_designware 80860F41:01: controller timed out
[ 213.373904] i2c_designware 80860F41:01: controller timed out
[ 214.397586] i2c_designware 80860F41:01: controller timed out
[ 214.652699] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 215.422593] i2c_designware 80860F41:01: controller timed out
[ 216.445688] i2c_designware 80860F41:01: controller timed out
[ 216.529562] Uhhuh. NMI received for unknown reason 2c on CPU 0.
[ 216.529564] Do you have a strange power saving mode enabled?
[ 216.529565] Dazed and confused, but trying to continue
[ 217.470338] i2c_designware 80860F41:01: controller timed out
[ 218.494410] i2c_designware 80860F41:01: controller timed out
[ 219.582142] i2c_designware 80860F41:01: controller timed out
[ 220.606616] i2c_designware 80860F41:01: controller timed out
[ 221.630722] i2c_designware 80860F41:01: controller timed out
[ 222.654869] i2c_designware 80860F41:01: controller timed out
[ 223.678964] i2c_designware 80860F41:01: controller timed out
[ 224.702816] i2c_designware 80860F41:01: controller timed out
[ 225.727177] i2c_designware 80860F41:01: controller timed out
[ 226.751266] i2c_designware 80860F41:01: controller timed out
[ 227.775371] i2c_designware 80860F41:01: controller timed out
[ 228.799471] i2c_designware 80860F41:01: controller timed out
[ 229.823552] i2c_designware 80860F41:01: controller timed out
------End of dmesg log after hibernation resume ------------------------
\
 
 \ /
  Last update: 2019-04-11 21:51    [W:0.152 / U:1.904 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site