[lkml]   [2019]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH 2/3] clk: rockchip: Make rkpwm a critical clock on rk3288
Am Dienstag, 9. April 2019, 22:47:06 CEST schrieb Douglas Anderson:
> Most rk3288-based boards are derived from the EVB and thus use a PWM
> regulator for the logic rail. However, most rk3288-based boards don't
> specify the PWM regulator in their device tree. We'll deal with that
> by making it critical.
> NOTE: it's important to make it critical and not just IGNORE_UNUSED
> because all PWMs in the system share the same clock. We don't want
> another PWM user to turn the clock on and off and kill the logic rail.
> This change is in preparation for actually having the PWMs in the
> rk3288 device tree actually point to the proper PWM clock. Up until
> now they've all pointed to the clock for the old IP block and they've
> all worked due to the fact that rkpwm was IGNORE_UNUSED and that the
> clock rates for both clocks were the same.
> Signed-off-by: Douglas Anderson <>

applied for 5.2
I've added a comment line describing the pwm-reg reason.


 \ /
  Last update: 2019-04-11 21:28    [W:0.154 / U:7.864 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site