lkml.org 
[lkml]   [2019]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] clk: rockchip: rk3288: Limit use of USB PHY clock to USB
Date
The USB PHY clock can be configured as (grand) parent of uart0_sclk and
sclk_gpu. It has been observed that UART0 doesn't work reliably in high
speed mode with the PHY clock as input when certain USB devices are
plugged to the USB HOST1 port (see https://crrev.com/c/320543).

Prefix the name of the PHY clock with a '.' in the non-USB muxes to
effectively remove the clock as input from these muxes.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
---
drivers/clk/rockchip/clk-rk3288.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
index 5a67b7869960..677bc5485201 100644
--- a/drivers/clk/rockchip/clk-rk3288.c
+++ b/drivers/clk/rockchip/clk-rk3288.c
@@ -200,8 +200,8 @@ PNAME(mux_aclk_cpu_src_p) = { "cpll_aclk_cpu", "gpll_aclk_cpu" };
PNAME(mux_pll_src_cpll_gpll_p) = { "cpll", "gpll" };
PNAME(mux_pll_src_npll_cpll_gpll_p) = { "npll", "cpll", "gpll" };
PNAME(mux_pll_src_cpll_gpll_npll_p) = { "cpll", "gpll", "npll" };
-PNAME(mux_pll_src_cpll_gpll_usb480m_p) = { "cpll", "gpll", "usbphy480m_src" };
-PNAME(mux_pll_src_cpll_gll_usb_npll_p) = { "cpll", "gpll", "usbphy480m_src", "npll" };
+PNAME(mux_pll_src_cpll_gpll_usb480m_p) = { "cpll", "gpll", ".usbphy480m_src" };
+PNAME(mux_pll_src_cpll_gll_usb_npll_p) = { "cpll", "gpll", ".usbphy480m_src", "npll" };

PNAME(mux_mmc_src_p) = { "cpll", "gpll", "xin24m", "xin24m" };
PNAME(mux_i2s_pre_p) = { "i2s_src", "i2s_frac", "ext_i2s", "xin12m" };
--
2.21.0.392.gf8f6787159e-goog
\
 
 \ /
  Last update: 2019-04-11 19:59    [W:0.093 / U:8.916 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site