lkml.org 
[lkml]   [2019]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] arm64: dts: imx8qxp: Add lpuart1/lpuart2/lpuart3 nodes
On Sat, Mar 30, 2019 at 05:07:44PM +0000, Daniel Baluta wrote:
> lpuart nodes are part of the ADMA subsystem. See Audio DMA
> memory map in iMX8 QXP RM [1]
>
> This patch is based on the dtsi file initially submitted by
> Teo Hall in i.MX NXP internal tree.
>
> [1] https://www.nxp.com/docs/en/reference-manual/IMX8DQXPRM.pdf
>
> Signed-off-by: Teo Hall <teo.hall@nxp.com>
> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
> ---
> arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 33 ++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> index 0cb939861a60..1adfe15c2ea5 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> @@ -193,6 +193,39 @@
> status = "disabled";
> };
>
> + adma_lpuart1: serial@5a070000 {
> + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
> + reg = <0x5a070000 0x1000>;
> + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-parent = <&gic>;
> + clocks = <&adma_lpcg IMX_ADMA_LPCG_UART1_BAUD_CLK>;
> + clock-names = "ipg";
> + power-domains = <&pd IMX_SC_R_UART_1>;
> + status = "disabled";
> + };
> +
> + adma_lpuart2: serial@5a080000 {
> + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
> + reg = <0x5a080000 0x1000>;
> + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-parent = <&gic>;
> + clocks = <&adma_lpcg IMX_ADMA_LPCG_UART2_BAUD_CLK>;
> + clock-names = "ipg";
> + power-domains = <&pd IMX_SC_R_UART_2>;
> + status = "disabled";
> + }

Missing semicolon.

> +
> + adma_lpuart3: serial@5a090000 {
> + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
> + reg = <0x5a090000 0x1000>;
> + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-parent = <&gic>;
> + clocks = <&adma_lpcg IMX_ADMA_LPCG_UART3_BAUD_CLK>;
> + clock-names = "ipg";
> + power-domains = <&pd IMX_SC_R_UART_3>;
> + status = "disabled";
> + }

Ditto.

I fixed them up when applying.

Shawn

> +
> adma_i2c0: i2c@5a800000 {
> compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
> reg = <0x5a800000 0x4000>;
> --
> 2.17.1

\
 
 \ /
  Last update: 2019-04-11 08:49    [W:0.072 / U:28.856 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site