lkml.org 
[lkml]   [2019]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] clk: rockchip: Fix video codec clocks on rk3288
Date
Hi Doug,

Am Donnerstag, 11. April 2019, 01:37:33 CEST schrieb Doug Anderson:
> Hi,
>
> On Wed, Apr 10, 2019 at 11:38 AM Jonas Karlman <jonas@kwiboo.se> wrote:
> >
> > On 2019-04-10 17:45, Doug Anderson wrote:
> > > Hi,
> > >
> > > On Fri, Mar 29, 2019 at 2:55 PM Douglas Anderson <dianders@chromium.org> wrote:
> > >> It appears that there is a typo in the rk3288 TRM. For
> > >> GRF_SOC_CON0[7] it says that 0 means "vepu" and 1 means "vdpu". It's
> > >> the other way around.
> > >>
> > >> How do I know? Here's my evidence:
> > >>
> > >> 1. Prior to commit 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec
> > >> using the new muxgrf type on rk3288") we always pretended that we
> > >> were using "aclk_vdpu" and the comment in the code said that this
> > >> matched the default setting in the system. In fact the default
> > >> setting is 0 according to the TRM and according to reading memory
> > >> at bootup. In addition rk3288-based Chromebooks ran like this and
> > >> the video codecs worked.
> > >> 2. With the existing clock code if you boot up and try to enable the
> > >> new VIDEO_ROCKCHIP_VPU as a module (and without "clk_ignore_unused"
> > >> on the command line), you get errors like "failed to get ack on
> > >> domain 'pd_video', val=0x80208". After flipping vepu/vdpu things
> > >> init OK.
> > >> 3. If I export and add both the vepu and vdpu to the list of clocks
> > >> for RK3288_PD_VIDEO I can get past the power domain errors, but now
> > >> I freeze when the vpu_mmu gets initted.
> > >> 4. If I just mark the "vdpu" as IGNORE_UNUSED then everything boots up
> > >> and probes OK showing that somehow the "vdpu" was important to keep
> > >> enabled. This is because we were actually using it as a parent.
> > >> 5. After this change I can hack "aclk_vcodec_pre" to parent from
> > >> "aclk_vepu" using assigned-clocks and the video codec still probes
> > >> OK.
> > >>
> > >> Fixes: 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec using the new muxgrf type on rk3288")
> > >> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> > >> ---
> > >> I currently have no way to test the JPEG mem2mem driver, so hopefully
> > >> others can test this and make sure it's happy for them. I'm just
> > >> happy not to get strange errors at boot anymore.
> > >>
> > >> drivers/clk/rockchip/clk-rk3288.c | 2 +-
> > >> 1 file changed, 1 insertion(+), 1 deletion(-)
> > > Any thoughts about this patch? I'm 99.9% certain it's correct and
> > > it'd be nice to get it landed. Heiko: I assume you're still
> > > collecting Rockchip clock patches and would be the one to apply it and
> > > (at some point) send a pull request to the clock tree?
> > >
> > > -Doug
> >
> > This clk fix is needed to make MPEG-2 decoding work on my RK3288 Tinker Board using the
> > rockchip vpu patchset and a patch to add RK3288 specific MPEG-2 code [1].
> >
> > Also note that the same change was suggested in a previous patch [2] from by ayaka.
> >
> > If possible please also add the CLK_SET_RATE_PARENT change from [3] in a possible v2,
> > that fixes assigning the aclk_vcodec clk to 400Mhz in the rockchip vpu driver.
> >
> > [1] https://github.com/Kwiboo/linux-rockchip/commit/1f78093e05c7360515a185f48b7c5cb8ba1e3e15
> > [2] https://patchwork.kernel.org/patch/9725553/
> > [3] https://github.com/Kwiboo/linux-rockchip/commit/9216da3f1521a0be5889235abe7fa093a4894160
>
> Thanks for the pointers! Now I'm 99.9999% certain that my patch is
> correct instead of just 99.9%. ;-)
>
> IMO the CLK_SET_RATE_PARENT should probably be a separate patch but it
> does seem like we need it. ...and actually the patch adding it should
> have a Fixes tag of the same commit. Prior to that commit the parent
> of "aclk_vcodec" was "aclk_vdpu". As a gate clock it would
> automatically have CLK_SET_RATE_PARENT so you could easily set the
> rate. ...and it looks as if the downstream video codec driver in
> Chrome OS relies on this too.
>
> I'm happy to add that in a v2 if Heiko is happy with it.

Sounds very sensible to me to combine these 2 parts.

Heiko


\
 
 \ /
  Last update: 2019-04-11 08:39    [W:0.062 / U:18.704 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site