lkml.org 
[lkml]   [2019]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 16/26] PCI: OF: Allow of_pci_get_max_link_speed() to be used by PCI Endpoint drivers
On Mon, Mar 25, 2019 at 03:09:37PM +0530, Kishon Vijay Abraham I wrote:
> of_pci_get_max_link_speed() is built only if CONFIG_PCI is enabled.
> Make of_pci_get_max_link_speed() to be also used by PCI Endpoint
> controllers with just CONFIG_PCI_ENDPOINT enabled.
>
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
> ---
> drivers/pci/Makefile | 2 +-
> drivers/pci/of.c | 44 +++++++++++++++++++++++---------------------
> 2 files changed, 24 insertions(+), 22 deletions(-)

I delegated this patch to Bjorn in the patch queue since it needs his
review/ACK to proceed.

Thanks,
Lorenzo

> diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
> index 657d642fcc67..28cdd8c0213a 100644
> --- a/drivers/pci/Makefile
> +++ b/drivers/pci/Makefile
> @@ -10,10 +10,10 @@ obj-$(CONFIG_PCI) += access.o bus.o probe.o host-bridge.o \
> ifdef CONFIG_PCI
> obj-$(CONFIG_PROC_FS) += proc.o
> obj-$(CONFIG_SYSFS) += slot.o
> -obj-$(CONFIG_OF) += of.o
> obj-$(CONFIG_ACPI) += pci-acpi.o
> endif
>
> +obj-$(CONFIG_OF) += of.o
> obj-$(CONFIG_PCI_QUIRKS) += quirks.o
> obj-$(CONFIG_PCIEPORTBUS) += pcie/
> obj-$(CONFIG_HOTPLUG_PCI) += hotplug/
> diff --git a/drivers/pci/of.c b/drivers/pci/of.c
> index 3d32da15c215..8095933f8452 100644
> --- a/drivers/pci/of.c
> +++ b/drivers/pci/of.c
> @@ -15,6 +15,7 @@
> #include <linux/of_pci.h>
> #include "pci.h"
>
> +#ifdef CONFIG_PCI
> void pci_set_of_node(struct pci_dev *dev)
> {
> if (!dev->bus->dev.of_node)
> @@ -196,27 +197,6 @@ int of_get_pci_domain_nr(struct device_node *node)
> }
> EXPORT_SYMBOL_GPL(of_get_pci_domain_nr);
>
> -/**
> - * This function will try to find the limitation of link speed by finding
> - * a property called "max-link-speed" of the given device node.
> - *
> - * @node: device tree node with the max link speed information
> - *
> - * Returns the associated max link speed from DT, or a negative value if the
> - * required property is not found or is invalid.
> - */
> -int of_pci_get_max_link_speed(struct device_node *node)
> -{
> - u32 max_link_speed;
> -
> - if (of_property_read_u32(node, "max-link-speed", &max_link_speed) ||
> - max_link_speed > 4)
> - return -EINVAL;
> -
> - return max_link_speed;
> -}
> -EXPORT_SYMBOL_GPL(of_pci_get_max_link_speed);
> -
> /**
> * of_pci_check_probe_only - Setup probe only mode if linux,pci-probe-only
> * is present and valid
> @@ -537,3 +517,25 @@ int pci_parse_request_of_pci_ranges(struct device *dev,
> return err;
> }
>
> +#endif /* CONFIG_PCI */
> +
> +/**
> + * This function will try to find the limitation of link speed by finding
> + * a property called "max-link-speed" of the given device node.
> + *
> + * @node: device tree node with the max link speed information
> + *
> + * Returns the associated max link speed from DT, or a negative value if the
> + * required property is not found or is invalid.
> + */
> +int of_pci_get_max_link_speed(struct device_node *node)
> +{
> + u32 max_link_speed;
> +
> + if (of_property_read_u32(node, "max-link-speed", &max_link_speed) ||
> + max_link_speed > 4)
> + return -EINVAL;
> +
> + return max_link_speed;
> +}
> +EXPORT_SYMBOL_GPL(of_pci_get_max_link_speed);
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2019-04-11 17:01    [W:1.368 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site