[lkml]   [2019]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH 1/3] dt-bindings: gpio: lpc32xx: document interrupt bindings
Hi Alexandre,

thanks for your patch!

On Wed, Apr 10, 2019 at 12:39 PM Alexandre Belloni
<> wrote:

> Some of the LPC32xx gpios are wired directly to one of the interrupt
> controllers while port 0 and port 1 share the same interrupt for their
> interrupt capable gpios.
> Cc: Rob Herring <>
> Signed-off-by: Alexandre Belloni <>

> +- interrupts: Should be the interrupt shared by port 0 and port 1 and the
> + interrupts for individual pins from port 3.
> +- interrupt-names : Should be the names of irq resources. The shared port
> + interrupt is named "p01", the other use the pin names.

The recent design pattern with hierarchical interrupts such as this one
is to simply hardcode the relationship between parent interrupt controller
and child interrupt controller in the driver.

However you should add interrupt-controller and possibly
interrupt-parent to the bindings and example.

More comments in patch 2.

Linus Walleij

 \ /
  Last update: 2019-04-11 15:50    [W:0.116 / U:9.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site