[lkml]   [2019]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH V5 0/3] hwmon: pwm-fan: Add RPM support
Contrary to the gpio-fan the pwm-fan driver isn't easy to setup
with pwmconfig/fancontrol because of the missing hwmon sysfs entry
for actual revolutions per minute. This series adds this feature.

Changes in V5:
- address Guenter's and Robin's comments:
- use of_property_read_u32 to get pulses-per-revolution
- call platform_get_irq ealier to avoid glitches on the regulator
- simplify pwm_fan_attrs_visible

Changes in V4:
- remove copy & paste artifact in dt-binding example
- switch to u64 for rpm calculation
- drop overflow handling and init atomic
- handle 0 not as valid irq
- reduce range of pulses_per_revolution
- handle probe defer of platform_get_irq
- delete timer properly in bail-out path

Changes in V3:
- rename property interrupt-ratio to pulses-per-revolution
to avoid confusion with interrupt binding
- handle error case pulses-per-revolution = 0
- bail out properly in case we are unable to request the irq

Changes in V2:
- address Guenter's comments:
- improve description of interrupts
- use atomic_t to avoid races of the pulse counter
- measure sample time to make rpm more reliable under load
- make sysfs entry fan1_input conditional
- add dt-property to define interrupts per fan revolution
- example for fan with RPM support

Stefan Wahren (3):
dt-bindings: hwmon: Add tachometer interrupt to pwm-fan
Documentation: pwm-fan: Add description for RPM support
hwmon: pwm-fan: Add RPM support via external interrupt

.../devicetree/bindings/hwmon/pwm-fan.txt | 21 +++-
Documentation/hwmon/pwm-fan | 3 +
drivers/hwmon/pwm-fan.c | 107 ++++++++++++++++++++-
3 files changed, 126 insertions(+), 5 deletions(-)


 \ /
  Last update: 2019-04-11 15:32    [W:0.135 / U:1.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site