lkml.org 
[lkml]   [2019]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3 4/5] arm64: dts: rk3399: Add dfi and dmc nodes.
Date
Hi Gaël,

Am Freitag, 22. März 2019, 00:14:39 CEST schrieb Gaël PORTAY:
> From: Lin Huang <hl@rock-chips.com>
>
> These are required to support DDR DVFS on rk3399 platform. The patch also
> introduces a new file with default DRAM settings.
>
> Signed-off-by: Lin Huang <hl@rock-chips.com>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> Signed-off-by: Gaël PORTAY <gael.portay@collabora.com>

> + dmc: dmc {
> + compatible = "rockchip,rk3399-dmc";
> + rockchip,pmu = <&pmugrf>;
> + devfreq-events = <&dfi>;
> + clocks = <&cru SCLK_DDRC>;
> + clock-names = "dmc_clk";
> + status = "disabled";
> + rockchip,ddr3_speed_bin = <21>;
> + rockchip,pd_idle = <0x40>;
> + rockchip,sr_idle = <0x2>;
> + rockchip,sr_mc_gate_idle = <0x3>;
> + rockchip,srpd_lite_idle = <0x4>;
> + rockchip,standby_idle = <0x2000>;
> + rockchip,dram_dll_dis_freq = <300000000>;
> + rockchip,phy_dll_dis_freq = <125000000>;
> + rockchip,auto_pd_dis_freq = <666000000>;
> + rockchip,ddr3_odt_dis_freq = <333000000>;
> + rockchip,ddr3_drv = <DDR3_DS_40ohm>;
> + rockchip,ddr3_odt = <DDR3_ODT_120ohm>;
> + rockchip,phy_ddr3_ca_drv = <PHY_DRV_ODT_40>;
> + rockchip,phy_ddr3_dq_drv = <PHY_DRV_ODT_40>;
> + rockchip,phy_ddr3_odt = <PHY_DRV_ODT_240>;
> + rockchip,lpddr3_odt_dis_freq = <333000000>;
> + rockchip,lpddr3_drv = <LP3_DS_34ohm>;
> + rockchip,lpddr3_odt = <LP3_ODT_240ohm>;
> + rockchip,phy_lpddr3_ca_drv = <PHY_DRV_ODT_40>;
> + rockchip,phy_lpddr3_dq_drv = <PHY_DRV_ODT_40>;
> + rockchip,phy_lpddr3_odt = <PHY_DRV_ODT_240>;
> + rockchip,lpddr4_odt_dis_freq = <333000000>;
> + rockchip,lpddr4_drv = <LP4_PDDS_60ohm>;
> + rockchip,lpddr4_dq_odt = <LP4_DQ_ODT_40ohm>;
> + rockchip,lpddr4_ca_odt = <LP4_CA_ODT_40ohm>;
> + rockchip,phy_lpddr4_ca_drv = <PHY_DRV_ODT_40>;
> + rockchip,phy_lpddr4_ck_cs_drv = <PHY_DRV_ODT_80>;
> + rockchip,phy_lpddr4_dq_drv = <PHY_DRV_ODT_80>;
> + rockchip,phy_lpddr4_odt = <PHY_DRV_ODT_60>;

as Rob mentioned in his review, these values look board-specific,
so should probably move over to the specific board you're using them
on?


Heiko


\
 
 \ /
  Last update: 2019-04-11 15:22    [W:0.090 / U:27.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site