lkml.org 
[lkml]   [2019]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/9] scsi: hisi_sas: Adjust the printk format of functions hisi_sas_init_device()
Date
From: Xiang Chen <chenxiang66@hisilicon.com>

In function hisi_sas_init_device(), the log is as follows when error for
hardreset:
hisi_sas_v3_hw 0000:74:02.0: SATA disk hardreset fail: 0xffffffed

Actually if hardreset failed, its return value is negative, so change
the print format from %x to %d.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas_main.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index d4da537f9a45..ede812759991 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -769,8 +769,7 @@ static int hisi_sas_init_device(struct domain_device *device)
}
sas_put_local_phy(local_phy);
if (rc) {
- dev_warn(dev, "SATA disk hardreset fail: 0x%x\n",
- rc);
+ dev_warn(dev, "SATA disk hardreset fail: %d\n", rc);
return rc;
}

--
2.17.1
\
 
 \ /
  Last update: 2019-04-11 14:49    [W:0.197 / U:5.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site