lkml.org 
[lkml]   [2019]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 04/11] pinctrl: sunxi: Support I/O bias voltage setting on H6
Hi,

On Thu, Apr 11, 2019 at 12:19:44PM +0200, megous@megous.com wrote:
> From: Ondrej Jirman <megous@megous.com>
>
> H6 SoC has a "pio group withstand voltage mode" register (datasheet
> description), that needs to be used to select either 1.8V or 3.3V I/O mode,
> based on what voltage is powering the respective pin banks and is thus used
> for I/O signals.
>
> Add support for configuring this register according to the voltage of the
> pin bank regulator (if enabled).
>
> This is similar to the support for I/O bias voltage setting patch for A80
> and the same concerns apply. See:
>
> commit 402bfb3c1352 ("Support I/O bias voltage setting on A80")
>
> Signed-off-by: Ondrej Jirman <megous@megous.com>
> ---
> drivers/pinctrl/sunxi/pinctrl-sun50i-h6.c | 1 +
> drivers/pinctrl/sunxi/pinctrl-sunxi.c | 11 +++++++++++
> drivers/pinctrl/sunxi/pinctrl-sunxi.h | 5 +++++
> 3 files changed, 17 insertions(+)
>
> diff --git a/drivers/pinctrl/sunxi/pinctrl-sun50i-h6.c b/drivers/pinctrl/sunxi/pinctrl-sun50i-h6.c
> index ef4268cc6227..3cc1121589c9 100644
> --- a/drivers/pinctrl/sunxi/pinctrl-sun50i-h6.c
> +++ b/drivers/pinctrl/sunxi/pinctrl-sun50i-h6.c
> @@ -591,6 +591,7 @@ static const struct sunxi_pinctrl_desc h6_pinctrl_data = {
> .irq_banks = 4,
> .irq_bank_map = h6_irq_bank_map,
> .irq_read_needs_mux = true,
> + .io_bias_cfg_variant = BIAS_VOLTAGE_PIO_POW_MODE_SEL,
> };
>
> static int h6_pinctrl_probe(struct platform_device *pdev)
> diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
> index 98c4de5f4019..0cbca30b75dc 100644
> --- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
> +++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
> @@ -614,6 +614,8 @@ static int sunxi_pinctrl_set_io_bias_cfg(struct sunxi_pinctrl *pctl,
> unsigned pin,
> struct regulator *supply)
> {
> + unsigned short bank = pin / PINS_PER_BANK;
> + unsigned long flags;
> u32 val, reg;
> int uV;
>
> @@ -651,6 +653,15 @@ static int sunxi_pinctrl_set_io_bias_cfg(struct sunxi_pinctrl *pctl,
> reg &= ~IO_BIAS_MASK;
> writel(reg | val, pctl->membase + sunxi_grp_config_reg(pin));
> return 0;
> + case BIAS_VOLTAGE_PIO_POW_MODE_SEL:
> + val = uV <= 1800000 ? 1 : 0;
> +
> + raw_spin_lock_irqsave(&pctl->lock, flags);
> + reg = readl(pctl->membase + PIO_POW_MOD_SEL_REG);
> + reg &= ~(1 << bank);
> + writel(reg | val << bank, pctl->membase + PIO_POW_MOD_SEL_REG);
> + raw_spin_unlock_irqrestore(&pctl->lock, flags);
> + return 0;
> default:
> return -EINVAL;
> }
> diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.h b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
> index 4bfc8a6d9dce..36186906f0a7 100644
> --- a/drivers/pinctrl/sunxi/pinctrl-sunxi.h
> +++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
> @@ -95,11 +95,16 @@
> #define PINCTRL_SUN7I_A20 BIT(7)
> #define PINCTRL_SUN8I_R40 BIT(8)
>
> +#define PIO_POW_MOD_SEL_REG 0x340
> +
> enum sunxi_desc_bias_voltage {
> BIAS_VOLTAGE_NONE,
> /* Bias voltage configuration is done through
> * Pn_GRP_CONFIG registers, as seen on A80 SoC. */
> BIAS_VOLTAGE_GRP_CONFIG,
> + /* Bias voltage is set through PIO_POW_MOD_SEL_REG
> + * register, as seen on H6 SoC, for example. */

That's not the proper comment style.

Once fixed, this patch and the previous is
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2019-04-11 14:22    [W:0.079 / U:5.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site