[lkml]   [2019]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 0/3] phy: renesas: rcar-gen3-usb2: enable/disable independent irqs
This patch set is based on the latest linux-phy.git / next branch with
the following patch:

Since the previous code enabled/disabled the irqs both OHCI and EHCI,
it is possible to cause unexpected interruptions. To avoid this,
this patch creates multiple phy instances from phandle and
enables/disables independent irqs by the instances.

Changes from v1 [1]:
- Rebased on the Biju-san's patch as above.
- Revise typo on the commit log of patch 1.
- Add deprecated value 0 on patch 1.
- Add Reviewed-by tags from Simon-san and Fabrizio-san on patch 2 and 3.
- Add Tested-by tag from Fabrizio-san on patch 3.
- Use enum instead of definitions.
- Add more a comment into rcar_gen3_get_dr_mode().
- Change name of tmp to mode and move the prototype into the loop.


Yoshihiro Shimoda (3):
dt-bindings: phy: rcar-gen3-phy-usb2: Revise #phy-cells property
phy: renesas: rcar-gen3-usb2: Use pdev's device pointer on dev_vdbg()
phy: renesas: rcar-gen3-usb2: enable/disable independent irqs

.../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 8 +-
drivers/phy/renesas/phy-rcar-gen3-usb2.c | 195 ++++++++++++++++++---
2 files changed, 173 insertions(+), 30 deletions(-)


 \ /
  Last update: 2019-04-11 12:32    [W:0.034 / U:1.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site