lkml.org 
[lkml]   [2019]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 06/11] dt-bindings: display: hdmi-connector: Add DDC power supply
Date
From: Ondrej Jirman <megous@megous.com>

Some Allwinner SoC using boards (Orange Pi 3 for example) need to enable
on-board voltage shifting logic for the DDC bus to be usable. Use
ddc-supply on the hdmi-connector to model this.

Add binding documentation for optional ddc-supply property.

Signed-off-by: Ondrej Jirman <megous@megous.com>
---
.../devicetree/bindings/display/connector/hdmi-connector.txt | 1 +
1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt b/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt
index 508aee461e0d..33085aeb0bb9 100644
--- a/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt
+++ b/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt
@@ -9,6 +9,7 @@ Optional properties:
- label: a symbolic name for the connector
- hpd-gpios: HPD GPIO number
- ddc-i2c-bus: phandle link to the I2C controller used for DDC EDID probing
+- ddc-supply: the power supply for the DDC bus

Required nodes:
- Video port for HDMI input
--
2.21.0
\
 
 \ /
  Last update: 2019-04-11 12:21    [W:0.123 / U:22.816 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site