lkml.org 
[lkml]   [2019]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 00/11] Add support for Orange Pi 3
Date
From: Ondrej Jirman <megous@megous.com>

This series implements support for Xunlong Orange Pi 3 board.

Unfortunately, this board needs some small driver patches, so I have
split the boards DT patch into chunks that require patches for drivers
in various subsystems.

Suggested merging plan/dependencies:

- Pinctrl and stmmac patches are needed for ethernet support.
(patches 1-5)
- HDMI support was changed, please review. (patches 6-8)
- brcmfmac patch 9, fixing firmware file selection, can be merged
now, after review, as it doesn't depend on anything (please
review :))
- mmc1 pinconf (patch 10) can probably be merged now, too (it will
certainly be used soon by all the other WiFi featuring boards
based on H6)
- WiFi dts patch will have to wait for H6 RTC patches, which in turn
depend on ChenYu's RTC series, to be merged. That will take a
while yet. I'm just keeping it in the series for completness.
(patch 11)

This patch is also needed to not get segfault on boot (it was already
merged):
https://lkml.org/lkml/2019/4/5/856

Changes in v2:
- added dt-bindings documentation for the board's compatible string
(suggested by Clement)
- addressed checkpatch warnings and code formatting issues (on Maxime's
suggestions)
- stmmac: dropped useless parenthesis, reworded description of the patch
(suggested by Sergei)
- drop useles dev_info() about the selected io bias voltage
- docummented io voltage bias selection variant macros
- wifi: marked WiFi DTS patch and realted mmc1_pins as "DO NOT MERGE",
because wifi depends on H6 RTC support that's not merged yet (suggested
by Clement)
- added missing signed-of-bys
- changed &usb2otg dr_mode to otg, and added a note about VBUS
- improved wording of HDMI driver's DDC power supply patch

Changes in v3:
- dropped already applied patches
- changed pinctrl I/O bias selection constants to enum and renamed
- added /omit-if-no-ref/ to mmc1_pins
- made mmc1_pins default pinconf for mmc1 in H6 dtsi
- move ddc-supply to HDMI connector node, updated patch descriptions,
changed dt-bindings docs

Please take a look.

thank you and regards,
Ondrej Jirman

Icenowy Zheng (2):
net: stmmac: sun8i: add support for Allwinner H6 EMAC
net: stmmac: sun8i: force select external PHY when no internal one

Ondrej Jirman (9):
pinctrl: sunxi: Prepare for alternative bias voltage setting methods
pinctrl: sunxi: Support I/O bias voltage setting on H6
arm64: dts: allwinner: orange-pi-3: Enable ethernet
dt-bindings: display: hdmi-connector: Add DDC power supply
drm: sun4i: Add support for enabling DDC I2C bus power to dw_hdmi glue
arm64: dts: allwinner: orange-pi-3: Enable HDMI output
brcmfmac: Loading the correct firmware for brcm43456
arm64: dts: allwinner: h6: Add MMC1 pins
[DO NOT MERGE] arm64: dts: allwinner: orange-pi-3: Enable WiFi

.../display/connector/hdmi-connector.txt | 1 +
.../dts/allwinner/sun50i-h6-orangepi-3.dts | 127 ++++++++++++++++++
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 11 ++
drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c | 60 ++++++++-
drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h | 2 +
.../net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 21 +++
.../broadcom/brcm80211/brcmfmac/sdio.c | 4 +-
drivers/pinctrl/sunxi/pinctrl-sun50i-h6.c | 1 +
drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c | 2 +-
drivers/pinctrl/sunxi/pinctrl-sunxi.c | 56 +++++---
drivers/pinctrl/sunxi/pinctrl-sunxi.h | 14 +-
11 files changed, 275 insertions(+), 24 deletions(-)

--
2.21.0

\
 
 \ /
  Last update: 2019-04-11 12:20    [W:0.086 / U:28.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site