lkml.org 
[lkml]   [2019]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RESEND PATCH 4/4] um: irq: don't set the chip for all irqs
Date
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Setting a chip for an interrupt marks it as allocated. Since UM doesn't
support dynamic interrupt numbers (yet), it means we cannot simply
increase NR_IRQS and then use the free irqs between LAST_IRQ and NR_IRQS
with gpio-mockup or iio testing drivers as irq_alloc_descs() will fail
after not being able to neither find an unallocated range of interrupts
nor expand the range.

Only call irq_set_chip_and_handler() for irqs until LAST_IRQ.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
---
arch/um/kernel/irq.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c
index f4874b7ec503..598d7b3d9355 100644
--- a/arch/um/kernel/irq.c
+++ b/arch/um/kernel/irq.c
@@ -479,7 +479,7 @@ void __init init_IRQ(void)
irq_set_chip_and_handler(TIMER_IRQ, &SIGVTALRM_irq_type, handle_edge_irq);


- for (i = 1; i < NR_IRQS; i++)
+ for (i = 1; i < LAST_IRQ; i++)
irq_set_chip_and_handler(i, &normal_irq_type, handle_edge_irq);
/* Initialize EPOLL Loop */
os_setup_epoll();
--
2.21.0
\
 
 \ /
  Last update: 2019-04-11 11:51    [W:0.104 / U:13.860 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site