lkml.org 
[lkml]   [2019]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v4 0/2] tty: serial: add DT bindings and serial driver for the SiFive FU540 UART
Date
This series adds a serial driver, with console support, for the
UART IP block present on the SiFive FU540 SoC. The programming
model is straightforward, but unique.

Boot-tested on a SiFive FU540 HiFive-U board, using BBL and the
open-source FSBL (with appropriate patches to the DT data).

This fourth version incorporates a few more comments from the lists.

The patches in this series can also be found, with the PRCI patches,
DT patches, and DT prerequisite patch, at:

https://github.com/sifive/riscv-linux/tree/dev/paulw/serial-v5.1-rc4


- Paul


Paul Walmsley (2):
dt-bindings: serial: add documentation for the SiFive UART driver
tty: serial: add driver for the SiFive UART

.../bindings/serial/sifive-serial.txt | 33 +
drivers/tty/serial/Kconfig | 24 +
drivers/tty/serial/Makefile | 1 +
drivers/tty/serial/sifive.c | 1067 +++++++++++++++++
include/uapi/linux/serial_core.h | 3 +
5 files changed, 1128 insertions(+)
create mode 100644 Documentation/devicetree/bindings/serial/sifive-serial.txt
create mode 100644 drivers/tty/serial/sifive.c

--
2.20.1

\
 
 \ /
  Last update: 2019-04-11 11:00    [W:0.058 / U:3.580 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site