lkml.org 
[lkml]   [2019]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/3] gpio: lpc32xx: enable interrupts for port 3
Date
Hi,

This series enables interrupt support for GPIOs on port 3. Those are the
GPIOs that are connected directl to an interrupt controller (sic1 or
sic2). This was tested on a custom LPC3250 design.

The binding includes support for interrupts on port 0 and port 1 but
this requires the registration of a proper irqchip and I don't have any
way to test it.

Patch 1 and 2 should probably go through the gpio tree while patch 3
should go through arm-soc. They are quite independant and this shoud
cause no issue.

Alexandre Belloni (3):
dt-bindings: gpio: lpc32xx: document interrupt bindings
gpio: lpc32xx: enable interrupt lookup for port 3
ARM: dts: lpc32xx: add GPIO interrupts

.../devicetree/bindings/gpio/gpio_lpc32xx.txt | 4 +++
arch/arm/boot/dts/lpc32xx.dtsi | 25 +++++++++++++++++++
drivers/gpio/gpio-lpc32xx.c | 14 ++++-------
3 files changed, 34 insertions(+), 9 deletions(-)

--
2.20.1

\
 
 \ /
  Last update: 2019-04-10 12:40    [W:0.071 / U:29.612 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site