[lkml]   [2019]   [Apr]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH 0/2] pwm: meson: two small bug-fixes
This series applies on top of my other fix "pwm: meson: fix scheduling
while atomic issue" from [0]

The first patch fixes an issue where the maximum possible pre-divider
(128) could not be used because there was an off-by-one error in the
code. I discovered this while testing with the longest supported period
(349514407ns) when running from XTAL. This is verified to work on my
Meson8b Odroid-C1 board using "pwm_b" on GPIOX_11.

The second patch was suggested by Uwe Kleine-König but was actually
implemented much earlier (back in mid 2018) by Bichao Zheng from
Amlogic. This patch fixes changing the duty cycle by relying on the
hardware to re-start the PWM output (instead of adding an artificial
"constant LOW" of about 20ms - as measured by Bichao Zheng when
stopping and re-starting the PWM output from within the driver). I
tested this fix on my Meson8b Odroid-C1 board which uses a PWM driven
CPU regulator (DVFS with all supported OPPs is still working fine for
me, although I couldn't observe any issues before this patch).

I also have some code-improvements queued which I'll send in the next
days, see [1]


Bichao Zheng (1):
pwm: meson: don't disable pwm when setting duty repeatedly

Martin Blumenstingl (1):
pwm: meson: consider 128 a valid pre-divider

drivers/pwm/pwm-meson.c | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)


 \ /
  Last update: 2019-04-01 20:18    [W:0.064 / U:5.980 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site