lkml.org 
[lkml]   [2019]   [Mar]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 2/4] dt-bindings: iio/temperature: Add doc for thermocouple-type
Date
This explains the new generic property "thermocouple-type" that
can be used with temperature sensors.

Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
---
Changes v6
- Add this file
---
.../bindings/iio/temperature/temperature-bindings.txt | 11 +++++++++++
1 file changed, 11 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/temperature/temperature-bindings.txt

diff --git a/Documentation/devicetree/bindings/iio/temperature/temperature-bindings.txt b/Documentation/devicetree/bindings/iio/temperature/temperature-bindings.txt
new file mode 100644
index 000000000000..69a6441d8083
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/temperature/temperature-bindings.txt
@@ -0,0 +1,11 @@
+If the temperature sensor device can be configured to use some specific
+thermocouple type, you can use the defined types provided in the file
+"include/dt-bindings/iio/temperature/thermocouple.h".
+
+Optional property:
+thermocouple-type: The type of the thermocouple used by the device.
+
+For example:
+ device {
+ thermocouple-type = <THERMOCOUPLE_TYPE_K> ;
+ };
--
2.19.1
\
 
 \ /
  Last update: 2019-03-07 11:35    [W:0.094 / U:1.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site