lkml.org 
[lkml]   [2019]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v11 2/4] arm: dts: mt2712: add uart APDMA to device tree
Date
1. add uart APDMA controller device node
2. add uart 0/1/2/3/4/5 DMA function

Signed-off-by: Long Cheng <long.cheng@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 51 +++++++++++++++++++++++++++++
1 file changed, 51 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index ee627a7..3469a6c 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -298,6 +298,9 @@
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
clocks = <&baud_clk>, <&sys_clk>;
clock-names = "baud", "bus";
+ dmas = <&apdma 10
+ &apdma 11>;
+ dma-names = "tx", "rx";
status = "disabled";
};

@@ -346,6 +349,39 @@
(GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_HIGH)>;
};

+ apdma: dma-controller@11000400 {
+ compatible = "mediatek,mt2712-uart-dma",
+ "mediatek,mt6577-uart-dma";
+ reg = <0 0x11000400 0 0x80>,
+ <0 0x11000480 0 0x80>,
+ <0 0x11000500 0 0x80>,
+ <0 0x11000580 0 0x80>,
+ <0 0x11000600 0 0x80>,
+ <0 0x11000680 0 0x80>,
+ <0 0x11000700 0 0x80>,
+ <0 0x11000780 0 0x80>,
+ <0 0x11000800 0 0x80>,
+ <0 0x11000880 0 0x80>,
+ <0 0x11000900 0 0x80>,
+ <0 0x11000980 0 0x80>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
+ dma-requests = <12>;
+ clocks = <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "apdma";
+ #dma-cells = <1>;
+ };
+
auxadc: adc@11001000 {
compatible = "mediatek,mt2712-auxadc";
reg = <0 0x11001000 0 0x1000>;
@@ -362,6 +398,9 @@
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
clocks = <&baud_clk>, <&sys_clk>;
clock-names = "baud", "bus";
+ dmas = <&apdma 0
+ &apdma 1>;
+ dma-names = "tx", "rx";
status = "disabled";
};

@@ -372,6 +411,9 @@
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
clocks = <&baud_clk>, <&sys_clk>;
clock-names = "baud", "bus";
+ dmas = <&apdma 2
+ &apdma 3>;
+ dma-names = "tx", "rx";
status = "disabled";
};

@@ -382,6 +424,9 @@
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
clocks = <&baud_clk>, <&sys_clk>;
clock-names = "baud", "bus";
+ dmas = <&apdma 4
+ &apdma 5>;
+ dma-names = "tx", "rx";
status = "disabled";
};

@@ -392,6 +437,9 @@
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
clocks = <&baud_clk>, <&sys_clk>;
clock-names = "baud", "bus";
+ dmas = <&apdma 6
+ &apdma 7>;
+ dma-names = "tx", "rx";
status = "disabled";
};

@@ -402,6 +450,9 @@
interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_LOW>;
clocks = <&baud_clk>, <&sys_clk>;
clock-names = "baud", "bus";
+ dmas = <&apdma 8
+ &apdma 9>;
+ dma-names = "tx", "rx";
status = "disabled";
};

--
1.7.9.5
\
 
 \ /
  Last update: 2019-03-07 02:46    [W:0.086 / U:24.780 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site