lkml.org 
[lkml]   [2019]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 7/8] spi: lpspi: Add the missing NULL check
Date
The spi_transfer *t will be used in one transfer whatever. If t is NULL,
there has no need to try sending data, so add an error return here.

Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Acked-by: Fugang Duan <Fugang.duan@nxp.com>
---
V2:
- add this patch in this version
---
drivers/spi/spi-fsl-lpspi.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
index 9ff32fb67a29..2ac3ac5ea50a 100644
--- a/drivers/spi/spi-fsl-lpspi.c
+++ b/drivers/spi/spi-fsl-lpspi.c
@@ -438,9 +438,12 @@ static int fsl_lpspi_setup_transfer(struct spi_controller *controller,
struct fsl_lpspi_data *fsl_lpspi =
spi_controller_get_devdata(spi->controller);

+ if (t == NULL)
+ return -EINVAL;
+
fsl_lpspi->config.mode = spi->mode;
- fsl_lpspi->config.bpw = t ? t->bits_per_word : spi->bits_per_word;
- fsl_lpspi->config.speed_hz = t ? t->speed_hz : spi->max_speed_hz;
+ fsl_lpspi->config.bpw = t->bits_per_word;
+ fsl_lpspi->config.speed_hz = t->speed_hz;
fsl_lpspi->config.chip_select = spi->chip_select;

if (!fsl_lpspi->config.speed_hz)
--
2.17.1
\
 
 \ /
  Last update: 2019-03-06 07:31    [W:0.097 / U:10.664 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site