lkml.org 
[lkml]   [2019]   [Mar]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 1/3] mmc: mmci: Support any block sizes for ux500v2 and qcom variant
Sorry for top-posting, patch included for context.

I saw today that Brian has the Nexus 5 working with Broadcom/Cypress
4339 over SDIO on the MMCI.

Brian are you managing to use the WLAN without this patch or is this
something you stacked up to make it work? (If you want context I
can forward the rest of the conversation where we discuss how to
fix it properly.)

I discussed this patch several times with Ulf and I think Niklas looked
at it too, but we never got around to fix it up properly.

Yours,
Linus Walleij


On Fri, Aug 22, 2014 at 6:54 AM Srinivas Kandagatla
<srinivas.kandagatla@linaro.org> wrote:

> From: Ulf Hansson <ulf.hansson@linaro.org>
>
> For the ux500v2 variant of the PL18x block, any block sizes are
> supported. This will make it possible to decrease data overhead
> for SDIO transfers.
>
> This patch is based on Ulf Hansson patch
> http://www.spinics.net/lists/linux-mmc/msg12160.html
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> enabled this support on qcom variant.
>
> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> drivers/mmc/host/mmci.c | 10 +++++++---
> 1 file changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
> index c11cb05..533ad2b 100644
> --- a/drivers/mmc/host/mmci.c
> +++ b/drivers/mmc/host/mmci.c
> @@ -77,6 +77,7 @@ static unsigned int fmax = 515633;
> * @qcom_fifo: enables qcom specific fifo pio read logic.
> * @reversed_irq_handling: handle data irq before cmd irq.
> * @qcom_dml: enables qcom specific dma glue for dma transfers.
> + * @any_blksize: true if block any sizes are supported
> */
> struct variant_data {
> unsigned int clkreg;
> @@ -102,6 +103,7 @@ struct variant_data {
> bool qcom_fifo;
> bool reversed_irq_handling;
> bool qcom_dml;
> + bool any_blksize;
> };
>
> static struct variant_data variant_arm = {
> @@ -194,6 +196,7 @@ static struct variant_data variant_ux500v2 = {
> .pwrreg_clkgate = true,
> .busy_detect = true,
> .pwrreg_nopower = true,
> + .any_blksize = true,
> };
>
> static struct variant_data variant_qcom = {
> @@ -212,6 +215,7 @@ static struct variant_data variant_qcom = {
> .explicit_mclk_control = true,
> .qcom_fifo = true,
> .qcom_dml = true,
> + .any_blksize = true,
> };
>
> static int mmci_card_busy(struct mmc_host *mmc)
> @@ -239,10 +243,11 @@ static int mmci_card_busy(struct mmc_host *mmc)
> static int mmci_validate_data(struct mmci_host *host,
> struct mmc_data *data)
> {
> + struct variant_data *variant = host->variant;
> +
> if (!data)
> return 0;
> -
> - if (!is_power_of_2(data->blksz)) {
> + if (!is_power_of_2(data->blksz) && !variant->any_blksize) {
> dev_err(mmc_dev(host->mmc),
> "unsupported block size (%d bytes)\n", data->blksz);
> return -EINVAL;
> @@ -796,7 +801,6 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
> writel(host->size, base + MMCIDATALENGTH);
>
> blksz_bits = ffs(data->blksz) - 1;
> - BUG_ON(1 << blksz_bits != data->blksz);
>
> if (variant->blksz_datactrl16)
> datactrl = MCI_DPSM_ENABLE | (data->blksz << 16);
> --
> 1.9.1
>

\
 
 \ /
  Last update: 2019-03-05 23:26    [W:0.137 / U:20.772 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site