lkml.org 
[lkml]   [2019]   [Mar]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v9 5/5] drm/sun4i: sun6i_mipi_dsi: Simplify dsi setup timings code
On Sun, Mar 03, 2019 at 11:05:27PM +0530, Jagan Teki wrote:
> DSI timings are varies between burst/non-burst devices and
> current driver is handling this support via if, else statements
> which would difficult to read.
>
> Simplify it by using goto to make code more readable.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> Tested-by: Merlijn Wajer <merlijn@wizzup.org>
> ---
> Note: This change is created based on previous version burst
> changes [1] by addressing comment from [2] by Maxime to make
> code readable.
>
> [1] https://patchwork.kernel.org/cover/10813623/
> [2] https://patchwork.kernel.org/patch/10666607/
>
> drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 79 ++++++++++++++------------
> 1 file changed, 42 insertions(+), 37 deletions(-)
>
> diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> index 31ec4048804d..898f32319c2d 100644
> --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> @@ -550,7 +550,8 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
> {
> struct mipi_dsi_device *device = dsi->device;
> unsigned int Bpp = mipi_dsi_pixel_format_to_bpp(device->format) / 8;
> - u16 hbp = 0, hfp = 0, hsa = 0, hblk = 0, vblk = 0;
> + u16 hbp, hfp, hsa, hblk;
> + u16 vblk = 0;
> u32 basic_ctl = 0;
> size_t bytes;
> u8 *buffer;
> @@ -558,6 +559,7 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
> /* Do all timing calculations up front to allocate buffer space */
>
> if (device->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) {
> + hbp = hfp = hsa = 0;

This raises a checkpatch warning and isn't necessary

> hblk = mode->hdisplay * Bpp;
> basic_ctl = SUN6I_DSI_BASIC_CTL_VIDEO_BURST |
> SUN6I_DSI_BASIC_CTL_HSA_HSE_DIS |
> @@ -566,48 +568,51 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
> if (device->lanes == 4)
> basic_ctl |= SUN6I_DSI_BASIC_CTL_TRAIL_FILL |
> SUN6I_DSI_BASIC_CTL_TRAIL_INV(0xc);
> - } else {
> - /*
> - * A sync period is composed of a blanking packet (4
> - * bytes + payload + 2 bytes) and a sync event packet
> - * (4 bytes). Its minimal size is therefore 10 bytes
> - */
> +
> + goto alloc_buf;

And I'd rather not have a goto in the middle of the code for no
particular reason.

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2019-03-04 16:51    [W:0.142 / U:27.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site