lkml.org 
[lkml]   [2019]   [Mar]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH v1 00/25] printk: new implementation
Hi John,

On (02/13/19 14:43), John Ogness wrote:
> Hi Sergey,
>
> I am glad to see that you are getting involved here. Your previous
> talks, work, and discussions were a large part of my research when
> preparing for this work.

YAYY! Thanks!

That's a pretty massive research and a patch set!

[..]
> If we are talking about an SMP system where logbuf_lock is locked, the
> call chain is actually:
>
> panic()
> crash_smp_send_stop()
> ... wait for "num_online_cpus() == 1" ...
> printk_safe_flush_on_panic();
> console_flush_on_panic();
>
> Is it guaranteed that the kernel will successfully stop the other CPUs
> so that it can print to the console?

Right. By the way, this reminds that I sort of wanted to send a patch
which would unconditionally raw_spin_lock_init(&logbuf_lock) (without
the num_online_cpus() check) in printk_safe_flush_on_panic().

> And then there is console_flush_on_panic(), which will ignore locks and
> write to the consoles, expecting them to check "oops_in_progress" and
> ignore their own internal locks.
>
> Is it guaranteed that locks can just be ignored and backtraces will be
> seen and legible to the user?

That's a tricky question. In the same way we may have no guarantees that
all consoles can sport ->atomic() write API. And then have no guarantees
that every system will have ->atomic consoles.

> > Do you see large latencies because of logbuf spinlock?
>
[..]
>
> For slow consoles, this can cause large latencies for some misfortunate
> tasks.

Yes, makes sense.

> > One thing that I have learned is that preemptible printk does not work
> > as expected; it wants to be 'atomic' and just stay busy as long as it
> > can.
> > We tried preemptible printk at Samsung and the result was just bad:
> > preempted printk kthread + slow serial console = lots of lost
> > messages
>
> As long as all critical messages are print directly and immediately to
> an emergency console, why is it is problem if the informational messages
> to consoles are sometimes delayed or lost? And if those informational
> messages _are_ so important, there are things the user can do. For
> example, create a realtime userspace task to read /dev/kmsg.
>
> > We also had preemptile printk in the upstream kernel and reverted the
> > patch (see fd5f7cde1b85d4c8e09); same reasons - we had reports that
> > preemptible printk could "stall" for minutes.
>
> But in this case the preemptible task was used for printing critical
> tasks as well. Then the stall really is a problem. I am proposing to
> rely on emergency consoles for critical messages. By changing printk to
> support 2 different channels (emergency and non-emergency), we can focus
> on making each of those channels optimal.

Right. Assuming that we always have at least one ->atomic channel
we can prioritize (and sacrifice !atomic channels, etc.). People,
sort of, already can prioritize some channels; IIRC, netcon can be
configured to print messages only when oops_in_progress and to drop
messages otherwise.

Things can get different if ->atomic channel is not available.

-ss

\
 
 \ /
  Last update: 2019-03-04 07:41    [W:0.122 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site