lkml.org 
[lkml]   [2019]   [Mar]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v4 5/7] s390: ap: implement PAPQ AQIC interception in kernel
From
Date
On 04/03/2019 02:57, Halil Pasic wrote:
> On Fri, 22 Feb 2019 16:29:58 +0100
> Pierre Morel <pmorel@linux.ibm.com> wrote:
>
>> We register the AP PQAP instruction hook during the open
>> of the mediated device. And unregister it on release.
>>
>> In the AP PQAP instruction hook, if we receive a demand to
>> enable IRQs,
>> - we retrieve the vfio_ap_queue based on the APQN we receive
>> in REG1,
>> - we retrieve the page of the guest address, (NIB), from
>> register REG2
>> - we the mediated device to use the VFIO pinning infratrsucture
>> to pin the page of the guest address,
>> - we retrieve the pointer to KVM to register the guest ISC
>> and retrieve the host ISC
>> - finaly we activate GISA
>>
>> If we receive a demand to disable IRQs,
>> - we deactivate GISA
>> - unregister from the GIB
>> - unping the NIB
>>
>> Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
>> ---
> [..]
>> + */
>> +static void vfio_ap_free_irq(struct vfio_ap_queue *q)
>> +{
>> + if (!q)
>> + return;
>> + if (q->g_pfn)
>> + vfio_unpin_pages(mdev_dev(q->matrix_mdev->mdev), &q->g_pfn, 1);
>> + if (q->isc)
>> + kvm_s390_gisc_unregister(q->matrix_mdev->kvm, q->isc);
>
> Ain't isc 0 a perfectly legit isc?

Exact, even GIB interface always gives 5 back I should initialize the
ISC to a bad value like > 7
Will do, thanks.

>
>> + q->nib = 0;
>> + q->isc = 0;
>> + q->g_pfn = 0;
>> +}
>> +
> [..]
>> @@ -109,10 +131,16 @@ static int vfio_ap_mdev_create(struct kobject *kobj, struct mdev_device *mdev)
>> static int vfio_ap_mdev_remove(struct mdev_device *mdev)
>> {
>> struct ap_matrix_mdev *matrix_mdev = mdev_get_drvdata(mdev);
>> + struct vfio_ap_queue *q, *qtmp;
>>
>> if (matrix_mdev->kvm)
>> return -EBUSY;
>>
>> + list_for_each_entry_safe(q, qtmp, &matrix_mdev->qlist, list) {
>> + q->matrix_mdev = NULL;
>> + vfio_ap_mdev_reset_queue(q);
>> + list_move(&q->list, &matrix_dev->free_list);
>
> How about matrix_dev->lock? I guess you should protect free_list with
> it. If not maybe a code comment would help not stumble over this.

Conny already commented that I forgot locks
I need a lock there and in the interception. May be more, I will check.

>
>> + }
>> mutex_lock(&matrix_dev->lock);
>> list_del(&matrix_mdev->node);
>> mutex_unlock(&matrix_dev->lock);
>
> [..]
>
>> +/**
>> + * vfio_ap_setirq: Enable Interruption for a APQN
>> + *
>> + * @dev: the device associated with the ap_queue
>> + * @q: the vfio_ap_queue holding AQIC parameters
>> + *
>> + * Pin the NIB saved in *q
>> + * Register the guest ISC to GIB interface and retrieve the
>> + * host ISC to issue the host side PQAP/AQIC
>> + *
>> + * Response.status may be set to following Response Code in case of error:
>> + * - AP_RESPONSE_INVALID_ADDRESS: vfio_pin_pages failed
>> + * - AP_RESPONSE_OTHERWISE_CHANGED: Hypervizor GISA internal error
>> + *
>> + * Otherwise return the ap_queue_status returned by the ap_aqic()
>> + */
>> +static struct ap_queue_status vfio_ap_setirq(struct vfio_ap_queue *q)
>> +{
>> + struct ap_qirq_ctrl aqic_gisa = {};
>> + struct ap_queue_status status = {};
>> + struct kvm_s390_gisa *gisa;
>> + struct kvm *kvm;
>> + unsigned long g_pfn, h_nib, h_pfn;
>> + int ret;
>> +
>> + kvm = q->matrix_mdev->kvm;
>> + gisa = kvm->arch.gisa_int.origin;
>> +
>> + g_pfn = q->nib >> PAGE_SHIFT;
>> + ret = vfio_pin_pages(mdev_dev(q->matrix_mdev->mdev), &g_pfn, 1,
>> + IOMMU_READ | IOMMU_WRITE, &h_pfn);
>> + switch (ret) {
>> + case 1:
>> + break;
>> + case -EINVAL:
>> + case -E2BIG:
>> + status.response_code = AP_RESPONSE_INVALID_ADDRESS;
>> + /* Fallthrough */
>> + default:
>> + return status;
>> + }
>> +
>> + h_nib = (h_pfn << PAGE_SHIFT) | (q->nib & ~PAGE_MASK);
>> + aqic_gisa.gisc = q->isc;
>> + aqic_gisa.isc = kvm_s390_gisc_register(kvm, q->isc);
>> + aqic_gisa.ir = 1;
>> + aqic_gisa.gisa = gisa->next_alert >> 4;
>> +
>> + status = ap_aqic(q->apqn, aqic_gisa, (void *)h_nib);
>> + switch (status.response_code) {
>> + case AP_RESPONSE_NORMAL:
>> + if (q->g_pfn)
>> + vfio_unpin_pages(mdev_dev(q->matrix_mdev->mdev),
>> + &q->g_pfn, 1);
>
> Shouldn't you call kvm_s390_gisc_unregister() here.

I should.


>
>> + q->g_pfn = g_pfn;
>> + break;
>> + case AP_RESPONSE_OTHERWISE_CHANGED:
>> + vfio_unpin_pages(mdev_dev(q->matrix_mdev->mdev), &g_pfn, 1);
>
> and here.

too

>
>> + break;
>> + case AP_RESPONSE_INVALID_GISA:
>> + status.response_code = AP_RESPONSE_INVALID_ADDRESS;
>> + default: /* Fall Through */
>> + pr_warn("%s: apqn %04x: response: %02x\n", __func__, q->apqn,
>> + status.response_code);
>> + vfio_ap_free_irq(q);
>
> This guy won't unpin g_pfn but only q->g_pfn if not zero :/

OK, seems I have to rework this all.
Thanks.

>
>> + break;
>> + }
>> +
>> + return status;
>> +}
>> +
>> +/**
>> + * handle_pqap: PQAP instruction callback
>> + *
>> + * @vcpu: The vcpu on which we received the PQAP instruction
>> + *
>> + * Get the general register contents to initialize internal variables.
>> + * REG[0]: APQN
>> + * REG[1]: IR and ISC
>> + * REG[2]: NIB
>> + *
>> + * Response.status may be set to following Response Code:
>> + * - AP_RESPONSE_Q_NOT_AVAIL: if the queue is not available
>> + * - AP_RESPONSE_DECONFIGURED: if the queue is not configured
>> + * - AP_RESPONSE_NORMAL (0) : in case of successs
>> + * Check vfio_ap_setirq() and vfio_ap_clrirq() for other possible
>> RC.
>> + *
>> + * Return 0 if we could handle the request inside KVM.
>> + * otherwise, returns -EOPNOTSUPP to let QEMU handle the fault.
>> + */
>> +static int handle_pqap(struct kvm_vcpu *vcpu)
>> +{
>> + uint64_t status;
>> + uint16_t apqn;
>> + struct vfio_ap_queue *q;
>> + struct ap_queue_status qstatus = {};
>> + struct ap_matrix_mdev *matrix_mdev;
>> +
>> + /* If we do not use the AIV facility just go to userland */
>> + if (!(vcpu->arch.sie_block->eca & ECA_AIV))
>> + return -EOPNOTSUPP;
>> +
>> + apqn = vcpu->run->s.regs.gprs[0] & 0xffff;
>> + matrix_mdev = vcpu->kvm->arch.crypto.vfio_private;
>> + if (!matrix_mdev)
>> + return -EOPNOTSUPP;
>> + q = vfio_ap_get_queue(apqn, &matrix_mdev->qlist);
>
> This get is not a 'refcount affecting get' any more...
>
>> + if (!q) {
>> + qstatus.response_code = AP_RESPONSE_Q_NOT_AVAIL;
>> + goto out;
>> + }
>> +
>> + status = vcpu->run->s.regs.gprs[1];
>> +
>> + /* If IR bit(16) is set we enable the interrupt */
>> + if ((status >> (63 - 16)) & 0x01) {
>> + q->isc = status & 0x07;
>> + q->nib = vcpu->run->s.regs.gprs[2];
>
> ... and I don't see what should prevent a potential use after free here.

I think this will be corrected when I add the lock I forgot in handle_pqap.

Thanks for the comments,

Regards,
Pierre


--
Pierre Morel
Linux/KVM/QEMU in Böblingen - Germany

\
 
 \ /
  Last update: 2019-03-04 10:48    [W:0.123 / U:1.176 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site