lkml.org 
[lkml]   [2019]   [Mar]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] arm64: dts: ls1088a: add one more thermal zone node
Date
Ls1088a has 2 thermal sensors, core cluster and SoC platform. Core cluster
sensor is used to monitor the temperature of core and SoC platform is for
platform. The current dts only support the first sensor.
This patch adds the second sensor node to dts to enable it.

Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
---
v2:
- Add more information about sensors to description
PS: In order to keep consistency to the first thermal-zone node, there will
be "WARNING: line over 80 characters" warnings.

arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 43 +++++++++++++++++++++--
1 files changed, 39 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 661137f..9f52bc9 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -129,19 +129,19 @@
};

thermal-zones {
- cpu_thermal: cpu-thermal {
+ ccu {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&tmu 0>;

trips {
- cpu_alert: cpu-alert {
+ ccu_alert: ccu-alert {
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};

- cpu_crit: cpu-crit {
+ ccu_crit: ccu-crit {
temperature = <95000>;
hysteresis = <2000>;
type = "critical";
@@ -150,7 +150,42 @@

cooling-maps {
map0 {
- trip = <&cpu_alert>;
+ trip = <&ccu_alert>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ plt {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 1>;
+
+ trips {
+ plt_alert: plt-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ plt_crit: plt-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&plt_alert>;
cooling-device =
<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
--
1.7.1
\
 
 \ /
  Last update: 2019-03-04 04:28    [W:0.099 / U:4.600 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site