[lkml]   [2019]   [Mar]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH 0/4] drm/panel: Add Novatek NT35596 panel driver
This patch set support Microtech MTF050FHDI-03 MIPI DSI panel, which
has Novatek NT35596 controller IC.

Since there is no proper programming guide for NT35596 IC, the driver
init sequence is referenced from [1] but analyzed based on datasheet.

NT35596 support several regulators on the chip, among those ony 4
regulators like VCI, VDDI/DVDD, AVDD, AVEE are used during power-on
sequence. Right now driver added code for 3-regulator based power-on
sequence since MTF050FHDI-03 panel support. This power-on sequence may
be moved to panel_desc in future, if there is any new panel would come
up with other type of sequence.


Any inputs?

Jagan Teki (4):
dt-bindings: Add vendor prefix for novatek
dt-bindings: Add vendor prefix for microtech
dt-bindings: display: Add Novatek NT35596 panel documentation
drm/panel: Add Novatek NT35596 panel driver

.../display/panel/novatek,nt35596.txt | 32 +
.../devicetree/bindings/vendor-prefixes.txt | 2 +
drivers/gpu/drm/panel/Kconfig | 13 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-novatek-nt35596.c | 860 ++++++++++++++++++
6 files changed, 914 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/novatek,nt35596.txt
create mode 100644 drivers/gpu/drm/panel/panel-novatek-nt35596.c


 \ /
  Last update: 2019-03-03 21:07    [W:0.036 / U:3.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site