lkml.org 
[lkml]   [2019]   [Mar]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v9 9/9] gpio: uniphier: Utilize for_each_set_clump8 macro
Date
Replace verbose implementation in set_multiple callback with
for_each_set_clump8 macro to simplify code and improve clarity. An
improvement in this case is that banks that are not masked will now be
skipped.

Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
drivers/gpio/gpio-uniphier.c | 16 ++++++----------
1 file changed, 6 insertions(+), 10 deletions(-)

diff --git a/drivers/gpio/gpio-uniphier.c b/drivers/gpio/gpio-uniphier.c
index 0f662b297a95..df640cb29b9c 100644
--- a/drivers/gpio/gpio-uniphier.c
+++ b/drivers/gpio/gpio-uniphier.c
@@ -15,9 +15,6 @@
#include <linux/spinlock.h>
#include <dt-bindings/gpio/uniphier-gpio.h>

-#define UNIPHIER_GPIO_BANK_MASK \
- GENMASK((UNIPHIER_GPIO_LINES_PER_BANK) - 1, 0)
-
#define UNIPHIER_GPIO_IRQ_MAX_NUM 24

#define UNIPHIER_GPIO_PORT_DATA 0x0 /* data */
@@ -147,15 +144,14 @@ static void uniphier_gpio_set(struct gpio_chip *chip,
static void uniphier_gpio_set_multiple(struct gpio_chip *chip,
unsigned long *mask, unsigned long *bits)
{
- unsigned int bank, shift, bank_mask, bank_bits;
- int i;
+ unsigned int i;
+ unsigned long bank_mask;
+ unsigned int bank;
+ unsigned int bank_bits;

- for (i = 0; i < chip->ngpio; i += UNIPHIER_GPIO_LINES_PER_BANK) {
+ for_each_set_clump8(i, bank_mask, mask, chip->ngpio) {
bank = i / UNIPHIER_GPIO_LINES_PER_BANK;
- shift = i % BITS_PER_LONG;
- bank_mask = (mask[BIT_WORD(i)] >> shift) &
- UNIPHIER_GPIO_BANK_MASK;
- bank_bits = bits[BIT_WORD(i)] >> shift;
+ bank_bits = bitmap_get_value8(bits, chip->ngpio, i);

uniphier_gpio_bank_write(chip, bank, UNIPHIER_GPIO_PORT_DATA,
bank_mask, bank_bits);
--
2.21.0
\
 
 \ /
  Last update: 2019-03-03 08:51    [W:0.182 / U:7.696 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site