lkml.org 
[lkml]   [2019]   [Mar]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 5/7] power: supply: add Ingenic JZ47xx battery driver.
On Thu, 21 Feb 2019 20:18:36 +0100
Artur Rojek <contact@artur-rojek.eu> wrote:

> On 2019-02-20 12:14, Jonathan Cameron wrote:
> > On Sun, 17 Feb 2019 15:29:14 +0100
> > Artur Rojek <contact@artur-rojek.eu> wrote:
> >
> >> Add a driver for battery present on Ingenic JZ47xx SoCs.
> >>
> >> Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
> > A few things inline.
> >
> > thanks,
> >
> > Jonathan
> Hi Jonathan.
>
> One thing inline.
>
> Artur
> >
> >> ---
> >> drivers/power/supply/Kconfig | 11 ++
> >> drivers/power/supply/Makefile | 1 +
> >> drivers/power/supply/ingenic-battery.c | 182
> >> +++++++++++++++++++++++++
> >> 3 files changed, 194 insertions(+)
> >> create mode 100644 drivers/power/supply/ingenic-battery.c
> >>
> >> diff --git a/drivers/power/supply/Kconfig
> >> b/drivers/power/supply/Kconfig
> >> index e901b9879e7e..9bfb1637ec28 100644
> >> --- a/drivers/power/supply/Kconfig
> >> +++ b/drivers/power/supply/Kconfig
> >> @@ -169,6 +169,17 @@ config BATTERY_COLLIE
> >> Say Y to enable support for the battery on the Sharp Zaurus
> >> SL-5500 (collie) models.
> >>
> >> +config BATTERY_INGENIC
> >> + tristate "Ingenic JZ47xx SoCs battery driver"
> >> + depends on MIPS || COMPILE_TEST
> >> + depends on INGENIC_ADC
> >> + help
> >> + Choose this option if you want to monitor battery status on
> >> + Ingenic JZ47xx SoC based devices.
> >> +
> >> + This driver can also be built as a module. If so, the module will
> >> be
> >> + called ingenic-battery.
> >> +
> >> config BATTERY_IPAQ_MICRO
> >> tristate "iPAQ Atmel Micro ASIC battery driver"
> >> depends on MFD_IPAQ_MICRO
> >> diff --git a/drivers/power/supply/Makefile
> >> b/drivers/power/supply/Makefile
> >> index b731c2a9b695..9e2c481d0187 100644
> >> --- a/drivers/power/supply/Makefile
> >> +++ b/drivers/power/supply/Makefile
> >> @@ -34,6 +34,7 @@ obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o
> >> obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o
> >> obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o
> >> obj-$(CONFIG_BATTERY_COLLIE) += collie_battery.o
> >> +obj-$(CONFIG_BATTERY_INGENIC) += ingenic-battery.o
> >> obj-$(CONFIG_BATTERY_IPAQ_MICRO) += ipaq_micro_battery.o
> >> obj-$(CONFIG_BATTERY_WM97XX) += wm97xx_battery.o
> >> obj-$(CONFIG_BATTERY_SBS) += sbs-battery.o
> >> diff --git a/drivers/power/supply/ingenic-battery.c
> >> b/drivers/power/supply/ingenic-battery.c
> >> new file mode 100644
> >> index 000000000000..4ee75c1ac241
> >> --- /dev/null
> >> +++ b/drivers/power/supply/ingenic-battery.c
> >> @@ -0,0 +1,182 @@
> >> +// SPDX-License-Identifier: GPL-2.0
> >> +/*
> >> + * Battery driver for the Ingenic JZ47xx SoCs
> >> + * Copyright (c) 2019 Artur Rojek <contact@artur-rojek.eu>
> >> + *
> >> + * based on drivers/power/supply/jz4740-battery.c
> >
> > What is the relationship between this driver and the older one?
> >
> >> + */
> >> +
> >> +#include <linux/iio/consumer.h>
> >> +#include <linux/module.h>
> >> +#include <linux/of.h>
> >> +#include <linux/platform_device.h>
> >> +#include <linux/power_supply.h>
> >> +#include <linux/property.h>
> >> +
> >> +struct ingenic_battery {
> >> + struct device *dev;
> >> + struct iio_channel *channel;
> >> + struct power_supply_desc desc;
> >> + struct power_supply *battery;
> >> + struct power_supply_battery_info info;
> >> +};
> >> +
> >> +static int ingenic_battery_get_property(struct power_supply *psy,
> >> + enum power_supply_property psp,
> >> + union power_supply_propval *val)
> >> +{
> >> + struct ingenic_battery *bat = power_supply_get_drvdata(psy);
> >> + struct power_supply_battery_info *info = &bat->info;
> >> + int ret = 0;
> >> +
> >> + switch (psp) {
> >> + case POWER_SUPPLY_PROP_HEALTH:
> >> + ret = iio_read_channel_processed(bat->channel, &val->intval);
> >> + val->intval *= 1000;
> >> + if (val->intval < info->voltage_min_design_uv)
> >> + val->intval = POWER_SUPPLY_HEALTH_DEAD;
> >> + else if (val->intval > info->voltage_max_design_uv)
> >> + val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
> >> + else
> >> + val->intval = POWER_SUPPLY_HEALTH_GOOD;
> >> + break;
> >> + case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> >> + ret = iio_read_channel_processed(bat->channel, &val->intval);
> >> + val->intval *= 1000;
> >> + break;
> >> + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
> >> + val->intval = info->voltage_min_design_uv;
> >> + break;
> >> + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
> >> + val->intval = info->voltage_max_design_uv;
> >> + break;
> >> + default:
> >> + return -EINVAL;
> >> + };
> >> +
> > Can't get here, so drop.
> Execution actually does reach this point.
> Would you rather have me return in individual switch cases instead?
good point. I'm clearly blind ;)

Yes, return in each case would probably be cleaner for consistency
with the default case. Either that or set ret and break in that
path as well.

> >
> >> + return ret;
> >> +}
> >> +
> >> +/* Set the most appropriate IIO channel voltage reference scale
> >> + * based on the battery's max voltage.
> >> + */
> >> +static int ingenic_battery_set_scale(struct ingenic_battery *bat)
> >> +{
> >> + const int *scale_raw;
> >> + int scale_len, scale_type, best_idx = -1, best_mV, max_raw, i, ret;
> >> + u64 max_mV;
> >> +
> >> + ret = iio_read_max_channel_raw(bat->channel, &max_raw);
> >> + if (ret) {
> >> + dev_err(bat->dev, "Unable to read max raw channel value\n");
> >> + return ret;
> >> + }
> >> +
> >> + ret = iio_read_avail_channel_attribute(bat->channel, &scale_raw,
> >> + &scale_type, &scale_len,
> >> + IIO_CHAN_INFO_SCALE);
> >> + if (ret < 0) {
> >> + dev_err(bat->dev, "Unable to read channel avail scale\n");
> >> + return ret;
> >> + }
> > This works under the constraints of knowing what ADC we are talking to,
> > but
> > this isn't generic. The relationship between scale and the range isn't
> > always
> > direct. i.e. there are devices where you sample the same range at a
> > lower
> > scale to be able to read it faster (can be thought of as oversampling,
> > or
> > just not running the last stages of a pipelined ADC).
> > Anyhow, doesn't matter here as I assume this is fine on this part.
> >
> >> + if (ret != IIO_AVAIL_LIST || scale_type != IIO_VAL_FRACTIONAL_LOG2)
> >> + return -EINVAL;
> >> +
> >> + max_mV = bat->info.voltage_max_design_uv / 1000;
> >> +
> >> + for (i = 1; i < scale_len; i += 2) {
> >> + u64 scale_mV = (max_raw * scale_raw[i - 1]) >> scale_raw[i];
> > Not keen on the offset in the index being backwards.
> >
> > This would be clearer I think as
> >
> > for (i = 0; i < scale_len; i+= 2) {
> > u64 scale_mv = (max_raw * scale_raw[i]) >> scale_raw[i + 1];
> > ...
> > best_idx = i;
> > }
> >
> >> +
> >> + if (scale_mV < max_mV)
> >> + continue;
> >> +
> >> + if (best_idx >= 0 && scale_mV > best_mV)
> >> + continue;
> >> +
> >> + best_mV = scale_mV;
> >> + best_idx = i - 1;
> >> + }
> >> +
> >> + if (best_idx < 0) {
> >> + dev_err(bat->dev, "Unable to find matching voltage scale\n");
> >> + return -EINVAL;
> >> + }
> >> +
> >> + return iio_write_channel_attribute(bat->channel,
> >> + scale_raw[best_idx],
> >> + scale_raw[best_idx+1],
> >
> > Spacing around that +.
> >
> >> + IIO_CHAN_INFO_SCALE);
> >> +}
> >> +
> >> +static enum power_supply_property ingenic_battery_properties[] = {
> >> + POWER_SUPPLY_PROP_HEALTH,
> >> + POWER_SUPPLY_PROP_VOLTAGE_NOW,
> >> + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
> >> + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
> >> +};
> >> +
> >> +static int ingenic_battery_probe(struct platform_device *pdev)
> >> +{
> >> + struct device *dev = &pdev->dev;
> >> + struct ingenic_battery *bat;
> >> + struct power_supply_config psy_cfg = {};
> >> + struct power_supply_desc *desc;
> >> + int ret;
> >> +
> >> + bat = devm_kzalloc(dev, sizeof(*bat), GFP_KERNEL);
> >> + if (!bat)
> >> + return -ENOMEM;
> >> +
> >> + bat->dev = dev;
> >> + bat->channel = devm_iio_channel_get(dev, "battery");
> >> + if (IS_ERR(bat->channel))
> >> + return PTR_ERR(bat->channel);
> >> +
> >> + desc = &bat->desc;
> >> + desc->name = "jz-battery";
> >> + desc->type = POWER_SUPPLY_TYPE_BATTERY;
> >> + desc->properties = ingenic_battery_properties;
> >> + desc->num_properties = ARRAY_SIZE(ingenic_battery_properties);
> >> + desc->get_property = ingenic_battery_get_property;
> >> + psy_cfg.drv_data = bat;
> >> + psy_cfg.of_node = dev->of_node;
> >> +
> >> + bat->battery = devm_power_supply_register(dev, desc, &psy_cfg);
> >> + if (IS_ERR(bat->battery)) {
> >> + dev_err(dev, "Unable to register battery\n");
> >> + return PTR_ERR(bat->battery);
> >> + }
> >> +
> >> + ret = power_supply_get_battery_info(bat->battery, &bat->info);
> >> + if (ret) {
> >> + dev_err(dev, "Unable to get battery info: %d\n", ret);
> >> + return ret;
> >> + }
> >> + if (bat->info.voltage_min_design_uv < 0) {
> >> + dev_err(dev, "Unable to get voltage min design\n");
> >> + return bat->info.voltage_min_design_uv;
> >> + }
> >> + if (bat->info.voltage_max_design_uv < 0) {
> >> + dev_err(dev, "Unable to get voltage max design\n");
> >> + return bat->info.voltage_max_design_uv;
> >> + }
> >> +
> >> + return ingenic_battery_set_scale(bat);
> >> +}
> >> +
> >> +#ifdef CONFIG_OF
> >> +static const struct of_device_id ingenic_battery_of_match[] = {
> >> + { .compatible = "ingenic,jz4740-battery", },
> >> + { },
> >> +};
> >> +MODULE_DEVICE_TABLE(of, ingenic_battery_of_match);
> >> +#endif
> >> +
> >> +static struct platform_driver ingenic_battery_driver = {
> >> + .driver = {
> >> + .name = "ingenic-battery",
> >> + .of_match_table = of_match_ptr(ingenic_battery_of_match),
> >> + },
> >> + .probe = ingenic_battery_probe,
> >> +};
> >> +module_platform_driver(ingenic_battery_driver);
>

\
 
 \ /
  Last update: 2019-03-03 17:54    [W:0.058 / U:5.476 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site