lkml.org 
[lkml]   [2019]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v13 01/11] bitops: Introduce the for_each_set_clump8 macro
On Thu, Mar 28, 2019 at 01:30:13PM +0900, William Breathitt Gray wrote:
> On Wed, Mar 27, 2019 at 07:42:54AM +0100, Lukas Wunner wrote:
> > On Wed, Mar 27, 2019 at 01:58:45PM +0900, William Breathitt Gray wrote:
> > > This macro iterates for each 8-bit group of bits (clump) with set bits,
> > > within a bitmap memory region. For each iteration, "start" is set to the
> > > bit offset of the found clump, while the respective clump value is
> > > stored to the location pointed by "clump". Additionally, the
> > > bitmap_get_value8 and bitmap_set_value8 functions are introduced to
> > > respectively get and set an 8-bit value in a bitmap memory region.
> >
> > I would have preferred static inlines for bitmap_get_value8(),
> > bitmap_set_value8() and find_next_clump8() to make this as fast
> > as possible in the callers because I've personally worked with
> > an industrial application where the GPIO pins of a 74x164 are
> > written every 250 usec.
>
> I'm not sure these can be static inline since the symbols are exported
> for use outside this file.

By static inlines I meant that the functions are moved to the appropriate
header file in include/linux/. You don't need to worry about exporting
in that case as the code is local to each module. For smallish functions
like these, static inlines are usually fine. See drivers/dma/virt-dma.h
for an extreme case of static inlines (as compared to the much smaller
virt-dma.c).

Thanks,

Lukas

\
 
 \ /
  Last update: 2019-03-28 08:31    [W:0.065 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site