lkml.org 
[lkml]   [2019]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [Qemu-devel] megasas: Unexpected response from lun 1 while scanning, scan aborted
From
Date
On 3/28/19 1:47 AM, Dongli Zhang wrote:
>
>
> On 3/27/19 7:31 PM, Hannes Reinecke wrote:
>> On 3/26/19 5:47 PM, Dongli Zhang wrote:
>>> I am reporting an error that the scsi lun cannot initialize successfully when I
>>> am emulating megasas scsi controller with qemu.
>>>
>>> I am not sure if this is issue in qemu or linux kernel.
>>>
>>> When 'lun=1' is specified, there is "Unexpected response from lun 1 while
>>> scanning, scan aborted".
>>>
>>> Everything works well if 'lun=0' is specified.
>>>
>>>
>>> Below is the qemu cmdline involved:
>>>
>>> -device megasas,id=scsi0 \
>>> -device scsi-hd,drive=drive0,bus=scsi0.0,lun=1 \
>>> -drive file=/home/zhang/img/test.img,if=none,id=drive0,format=raw
>>>
>>>
>>> Below is the syslog related to 'scsi|SCSI'
>>>
>>> # dmesg | grep SCSI
>>> [    0.392494] SCSI subsystem initialized
>>> [    0.460666] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
>>> 251)
>>> [    0.706788] sd 1:0:0:0: [sda] Attached SCSI disk
>>> # dmesg | grep scsi
>>> [    0.511643] scsi host0: Avago SAS based MegaRAID driver
>>> [    0.523302] scsi 0:2:0:0: Unexpected response from lun 1 while scanning,
>>> scan aborted
>>> [    0.540364] scsi host1: ata_piix
>>> [    0.540780] scsi host2: ata_piix
>>> [    0.702396] scsi 1:0:0:0: Direct-Access     ATA      QEMU HARDDISK    2.5+
>>> PQ: 0 ANSI: 5
>>>
>>> When 'lun=1' is changed to 'lun=0', there is no issue.
>>>
>>> Thank you very much!
>>>
>> That's an artifact from the megasas emulation in quemu.
>> Megasas (internally) can't handle LUN numbers (the RAID part only knows about
>> 'disks'), so I took the decision to not expose devices with LUN != 0.
>> Please use a different SCSI target number, not a non-zero LUN number.
>
> The guest kernel is able to detect the disk if lun is always 0, while target
> number is changed:
>
> -device scsi-hd,drive=drive0,bus=scsi0.0,channel=0,scsi-id=0,lun=0
> -device scsi-hd,drive=drive1,bus=scsi0.0,channel=0,scsi-id=1,lun=0
>
> # dmesg | grep scsi
> [ 0.935999] scsi host0: ata_piix
> [ 0.936401] scsi host1: ata_piix
> [ 1.100945] scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 2.5+
> PQ: 0 ANSI: 5
> [ 1.102409] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 1.672952] scsi host2: Avago SAS based MegaRAID driver
> [ 1.683886] scsi 2:2:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+
> PQ: 0 ANSI: 5
> [ 1.684915] scsi 2:2:1:0: Direct-Access QEMU QEMU HARDDISK 2.5+
> PQ: 0 ANSI: 5
> [ 1.701529] sd 2:2:0:0: Attached scsi generic sg1 type 0
> [ 1.704795] sd 2:2:1:0: Attached scsi generic sg2 type 0
> # dmesg | grep SCSI
> [ 0.111015] SCSI subsystem initialized
> [ 0.904712] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
> [ 1.121174] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 1.703739] sd 2:2:0:0: [sdb] Attached SCSI disk
> [ 1.706964] sd 2:2:1:0: [sdc] Attached SCSI disk
>
>
>
> If device with LUN != 0 will not be exposed, why not set max_lun = 0 as what
> qemu lsi is doing?
>
> diff --git a/hw/scsi/megasas.c b/hw/scsi/megasas.c
> index a56317e..c966ee0 100644
> --- a/hw/scsi/megasas.c
> +++ b/hw/scsi/megasas.c
> @@ -2298,7 +2298,7 @@ static void megasas_scsi_uninit(PCIDevice *d)
> static const struct SCSIBusInfo megasas_scsi_info = {
> .tcq = true,
> .max_target = MFI_MAX_LD,
> - .max_lun = 255,
> + .max_lun = 0,
>
> .transfer_data = megasas_xfer_complete,
> .get_sg_list = megasas_get_sg_list,
>
Hmm. Good point.

In _theory_ one could just jbod mode, in which case _all_ LUNs are
exposed. But then we could probably adjust it, based on which mode is
selected.
I'll check.

Cheers,

Hannes
--
Dr. Hannes Reinecke Teamlead Storage & Networking
hare@suse.de +49 911 74053 688
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: Felix Imendörffer, Mary Higgins, Sri Rasiah
HRB 21284 (AG Nürnberg)

\
 
 \ /
  Last update: 2019-03-28 15:26    [W:0.066 / U:0.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site