[lkml]   [2019]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v3 00/36] thunderbolt: Software connection manager improvements

This is third iteration of the patch series intending to bring same kind of
functionality for older Apple systems than we have in PCs. Software
connection manager is used on Apple hardware with Light Ridge, Cactus Ridge
or Falcon Ridge controllers to create PCIe tunnels when a Thunderbolt
device is connected. Currently only one PCIe tunnel is supported. On newer
Alpine Ridge based Apple systems the driver starts the firmware which then
takes care creating tunnels.

This series improves the software connection manager so that it will

- Full PCIe daisy chains (up to 6 devices)
- Display Port tunneling
- P2P networking

We also add support for Titan Ridge based Apple systems where we can use
the same flows than with Alpine Ridge to start the firmware.

This applies on top of thunderbolt.git/next.

Christian, Mario do you see any issues with patch [05/36] regarding bolt
and fwupd? The kernel is supposed to restart the syscall automatically so
userspace should not be affected but wanted to check with you.

Previous version of the patch series can be viewed here:


Making v3 took longer than I anticipated mostly due to some issues I run
during testing the new changes. There are quite many changes so I dropped
the reviewed-by tags I got for v2. Below is the list of major changes from
the previous version:

* Always set port->remote even in case of dual link connection.

* Leave (DP, PCIe) tunnels up when the driver is unloaded. When loaded
back, it discovers the existing tunnels and updated data structures
accordingly. I noticed that the code in v2 did not support cases
properly when you unplug something before the driver gets loaded back.
This version tears down partial paths during discovery.

* Do not automatically create PCIe tunnels. Instead we implement "user"
security level in the software connection manager as well taking
advantage of the existing sysfs interfaces. This allows user to disable
PCIe tunneling completely or implement different white listing
policies. Major distros include bolt system daemon that takes care of

* When testing on two-port Falcon Ridge based system I realized
that we always just pick the first available PCIe downstream adapter
regardless of which Thunderbolt port you plug the device which is not
consistent. To solve this we add mapping between host PCIe downstream
adapter and the Thunderbolt port for Cactus Ridge and Falcon Ridge
based systems.

* Take domain lock in switch sysfs callbacks. This is needed because the
software connection manager needs to walk over the topology during
tunnel creation so switch_lock is not enough anymore.

Changes from v1:

* Added ACK from David

* Add constant (TMU_ACCESS_EN) for BIT(20) when TMU access is enabled. We
keep it in cap.c close to the LR/ER workaround. Also we enable/disable
only during capability walk. If it turns we need to have it enabled
elsewhere we can move it to switch.c and enable just once during
switch enumeration.

* Use 0 to mean no cap_adap instead of negative value. This follows

* Use correct PCI IDs (_BRIDGE) in the last patch where we start firmware
on Titan Ridge. It wrongly used NHI PCI IDs in v1.

Mika Westerberg (36):
net: thunderbolt: Unregister ThunderboltIP protocol handler when suspending
thunderbolt: Remove unused work field in struct tb_switch
thunderbolt: Drop duplicated get_switch_by_route()
thunderbolt: Block reads and writes if switch is unplugged
thunderbolt: Take domain lock in switch sysfs attribute callbacks
thunderbolt: Do not allocate switch if depth is greater than 6
thunderbolt: Enable TMU access when accessing port space on legacy devices
thunderbolt: Add dummy read after port capability list walk on Light Ridge
thunderbolt: Move LC specific functionality into a separate file
thunderbolt: Configure lanes when switch is initialized
thunderbolt: Set sleep bit when suspending switch
thunderbolt: Properly disable path
thunderbolt: Cache adapter specific capability offset into struct port
thunderbolt: Rename tunnel_pci to tunnel
thunderbolt: Generalize tunnel creation functionality
thunderbolt: Add functions for allocating and releasing HopIDs
thunderbolt: Assign remote for both ports in case of dual link
thunderbolt: Add helper function to iterate from one port to another
thunderbolt: Extend tunnel creation to more than 2 adjacent switches
thunderbolt: Deactivate all paths before restarting them
thunderbolt: Discover preboot PCIe paths the boot firmware established
thunderbolt: Add support for full PCIe daisy chains
thunderbolt: Scan only valid NULL adapter ports in hotplug
thunderbolt: Generalize port finding routines to support all port types
thunderbolt: Rework NFC credits handling
thunderbolt: Add support for Display Port tunnels
thunderbolt: Do not tear down tunnels when driver is unloaded
thunderbolt: Run tb_xdp_handle_request() in system workqueue
thunderbolt: Add XDomain UUID exchange support
thunderbolt: Add support for DMA tunnels
thunderbolt: Make tb_switch_alloc() return ERR_PTR()
thunderbolt: Add support for XDomain connections
thunderbolt: Make __TB_[SW|PORT]_PRINT take const parameters
thunderbolt: Make rest of the logging to happen at debug level
thunderbolt: Reword output of tb_dump_hop()
thunderbolt: Start firmware on Titan Ridge Apple systems

drivers/net/thunderbolt.c | 3 +
drivers/thunderbolt/Makefile | 4 +-
drivers/thunderbolt/cap.c | 85 +++-
drivers/thunderbolt/ctl.c | 2 +-
drivers/thunderbolt/icm.c | 60 ++-
drivers/thunderbolt/lc.c | 179 ++++++++
drivers/thunderbolt/nhi.c | 3 +-
drivers/thunderbolt/path.c | 421 ++++++++++++++++---
drivers/thunderbolt/switch.c | 551 +++++++++++++++++++-----
drivers/thunderbolt/tb.c | 608 ++++++++++++++++++++-------
drivers/thunderbolt/tb.h | 173 +++++++-
drivers/thunderbolt/tb_msgs.h | 11 +
drivers/thunderbolt/tb_regs.h | 50 ++-
drivers/thunderbolt/tunnel.c | 691 +++++++++++++++++++++++++++++++
drivers/thunderbolt/tunnel.h | 78 ++++
drivers/thunderbolt/tunnel_pci.c | 226 ----------
drivers/thunderbolt/tunnel_pci.h | 31 --
drivers/thunderbolt/xdomain.c | 147 ++++++-
include/linux/thunderbolt.h | 8 +
19 files changed, 2680 insertions(+), 651 deletions(-)
create mode 100644 drivers/thunderbolt/lc.c
create mode 100644 drivers/thunderbolt/tunnel.c
create mode 100644 drivers/thunderbolt/tunnel.h
delete mode 100644 drivers/thunderbolt/tunnel_pci.c
delete mode 100644 drivers/thunderbolt/tunnel_pci.h


 \ /
  Last update: 2019-03-28 13:41    [W:0.618 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site