lkml.org 
[lkml]   [2019]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 20/36] thunderbolt: Deactivate all paths before restarting them
Date
State of the connected devices and tunnel configuration is not known
during resume. For example some paths may not be complete anymore if the
user has unplugged the related devices. So instead of marking all paths
as inactive we go ahead and deactivate them explicitly before we restart
them.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
drivers/thunderbolt/tunnel.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/thunderbolt/tunnel.c b/drivers/thunderbolt/tunnel.c
index 91d7e00516b4..e109578da175 100644
--- a/drivers/thunderbolt/tunnel.c
+++ b/drivers/thunderbolt/tunnel.c
@@ -185,8 +185,18 @@ int tb_tunnel_restart(struct tb_tunnel *tunnel)

tb_tunnel_info(tunnel, "activating\n");

+ /*
+ * Make sure all paths are properly disabled before enabling
+ * them again.
+ */
+ for (i = 0; i < tunnel->npaths; i++) {
+ if (tunnel->paths[i]->activated) {
+ tb_path_deactivate(tunnel->paths[i]);
+ tunnel->paths[i]->activated = false;
+ }
+ }
+
for (i = 0; i < tunnel->npaths; i++) {
- tunnel->paths[i]->activated = false;
res = tb_path_activate(tunnel->paths[i]);
if (res)
goto err;
--
2.20.1
\
 
 \ /
  Last update: 2019-03-28 13:38    [W:0.126 / U:10.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site