lkml.org 
[lkml]   [2019]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V1 14/26] spi: tegra114: add 3 wire transfer mode support
Date
This patch adds 3 wire transfer support to SPI mode list and also
implements it.

3 wire or Bi-directional mode uses only one serial data pin for
the transfer. SPI in master mode uses MOSI data line only and MISO
data line is not used by the SPI.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
drivers/spi/spi-tegra114.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c
index 335c594d5b74..01efb615a196 100644
--- a/drivers/spi/spi-tegra114.c
+++ b/drivers/spi/spi-tegra114.c
@@ -755,6 +755,11 @@ static u32 tegra_spi_setup_transfer_one(struct spi_device *spi,
else
command1 &= ~SPI_LSBIT_FE;

+ if (spi->mode & SPI_3WIRE)
+ command1 |= SPI_BIDIROE;
+ else
+ command1 &= ~SPI_BIDIROE;
+
if (tspi->cs_control) {
if (tspi->cs_control != spi)
tegra_spi_writel(tspi, command1, SPI_COMMAND1);
@@ -1148,7 +1153,7 @@ static int tegra_spi_probe(struct platform_device *pdev)

/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST |
- SPI_TX_DUAL | SPI_RX_DUAL;
+ SPI_TX_DUAL | SPI_RX_DUAL | SPI_3WIRE;
master->setup = tegra_spi_setup;
master->transfer_one_message = tegra_spi_transfer_one_message;
master->num_chipselect = MAX_CHIP_SELECT;
--
2.7.4
\
 
 \ /
  Last update: 2019-03-27 06:59    [W:0.213 / U:107.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site