lkml.org 
[lkml]   [2019]   [Mar]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 6/6] dt-bindings: fpga: Add bindings for ZynqMP fpga driver
Date
Add documentation to describe Xilinx ZynqMP fpga driver
bindings.

Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
---
Changes for v5:
-Moved pcap node as a child to firwmare
node as suggested by Rob.
Changes for v4:
-Modified binding description as suggested by Moritz Fischer.
Changes for v3:
-Removed PCAP as a child node to the FW and Created
an independent node since PCAP driver is a consumer
not a provider.

.../bindings/fpga/xlnx,zynqmp-pcap-fpga.txt | 25 +++++++++++++++++++
1 file changed, 25 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt

diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
new file mode 100644
index 000000000000..3052bf619dd5
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
@@ -0,0 +1,25 @@
+Devicetree bindings for Zynq Ultrascale MPSoC FPGA Manager.
+The ZynqMP SoC uses the PCAP (Processor configuration Port) to configure the
+Programmable Logic (PL). The configuration uses the firmware interface.
+
+Required properties:
+- compatible: should contain "xlnx,zynqmp-pcap-fpga"
+
+Example for full FPGA configuration:
+
+ fpga-region0 {
+ compatible = "fpga-region";
+ fpga-mgr = <&zynqmp_pcap>;
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ };
+
+ firmware {
+ zynqmp_firmware: zynqmp-firmware {
+ compatible = "xlnx,zynqmp-firmware";
+ method = "smc";
+ zynqmp_pcap: pcap {
+ compatible = "xlnx,zynqmp-pcap-fpga";
+ };
+ };
+ };
--
2.18.0
\
 
 \ /
  Last update: 2019-03-26 15:33    [W:0.047 / U:31.812 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site