lkml.org 
[lkml]   [2019]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH V2 3/6] mmc: mmci: define get_dctrl_cfg for legacy variant
On Thu, 7 Mar 2019 at 17:39, Ludovic Barre <ludovic.Barre@st.com> wrote:
>
> From: Ludovic Barre <ludovic.barre@st.com>
>
> This patch defines get_dctrl_cfg callback for legacy variants
> whatever DMA_ENGINE configuration.
>
> Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
> ---
> drivers/mmc/host/mmci.c | 44 ++++++++++++++++++++++++++++++++++++--------
> drivers/mmc/host/mmci.h | 3 +++
> 2 files changed, 39 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
> index 28b76c5..52f9dbf 100644
> --- a/drivers/mmc/host/mmci.c
> +++ b/drivers/mmc/host/mmci.c
> @@ -46,12 +46,6 @@
>
> #define DRIVER_NAME "mmci-pl18x"
>
> -#ifdef CONFIG_DMA_ENGINE
> -static void mmci_variant_init(struct mmci_host *host);
> -#else
> -static inline void mmci_variant_init(struct mmci_host *host) {}
> -#endif
> -
> static unsigned int fmax = 515633;
>
> static struct variant_data variant_arm = {
> @@ -231,7 +225,7 @@ static struct variant_data variant_ux500v2 = {
> .irq_pio_mask = MCI_IRQ_PIO_MASK,
> .start_err = MCI_STARTBITERR,
> .opendrain = MCI_OD,
> - .init = mmci_variant_init,
> + .init = mmci_ux500v2_variant_init,
> };
>
> static struct variant_data variant_stm32 = {
> @@ -617,6 +611,29 @@ static void mmci_init_sg(struct mmci_host *host, struct mmc_data *data)
> sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
> }
>
> +u32 mmci_get_dctrl_cfg(struct mmci_host *host)
> +{
> + u32 datactrl;
> +
> + datactrl = MCI_DPSM_ENABLE;
> + datactrl |= mmci_dctrl_blksz(host) | mmci_dctrl_dir(host);
> + datactrl |= mmci_dctrl_sdio(host) | mmci_dctrl_ddr(host);
> +
> + return datactrl;
> +}
> +
> +u32 mmci_ux500v2_get_dctrl_cfg(struct mmci_host *host)

To be consistent with other variant function names, let's drop the
"mmci_"* prefix.

> +{
> + u32 datactrl;
> +
> + datactrl = MCI_DPSM_ENABLE;
> + datactrl |= (host->data->blksz << 16);
> + datactrl |= mmci_dctrl_dir(host);
> + datactrl |= mmci_dctrl_sdio(host) | mmci_dctrl_ddr(host);
> +
> + return datactrl;
> +}
> +
> /*
> * All the DMA operation mode stuff goes inside this ifdef.
> * This assumes that you have a generic DMA device interface,
> @@ -941,6 +958,7 @@ void mmci_dmae_unprep_data(struct mmci_host *host,
> static struct mmci_host_ops mmci_variant_ops = {
> .prep_data = mmci_dmae_prep_data,
> .unprep_data = mmci_dmae_unprep_data,
> + .get_datactrl_cfg = mmci_get_dctrl_cfg,
> .get_next_data = mmci_dmae_get_next_data,
> .dma_setup = mmci_dmae_setup,
> .dma_release = mmci_dmae_release,
> @@ -948,12 +966,22 @@ static struct mmci_host_ops mmci_variant_ops = {
> .dma_finalize = mmci_dmae_finalize,
> .dma_error = mmci_dmae_error,
> };
> +#else
> +static struct mmci_host_ops mmci_variant_ops = {
> + .get_datactrl_cfg = mmci_get_dctrl_cfg,
> +}
> +#endif
>
> void mmci_variant_init(struct mmci_host *host)
> {
> host->ops = &mmci_variant_ops;
> }
> -#endif
> +
> +void mmci_ux500v2_variant_init(struct mmci_host *host)
> +{
> + host->ops = &mmci_variant_ops;
> + host->ops->get_datactrl_cfg = mmci_ux500v2_get_dctrl_cfg;
> +}
>
> static void mmci_pre_request(struct mmc_host *mmc, struct mmc_request *mrq)
> {
> diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
> index 32ae41d..bfc6e54 100644
> --- a/drivers/mmc/host/mmci.h
> +++ b/drivers/mmc/host/mmci.h
> @@ -448,6 +448,9 @@ void mmci_dmae_finalize(struct mmci_host *host, struct mmc_data *data);
> void mmci_dmae_error(struct mmci_host *host);
> #endif
>
> +void mmci_variant_init(struct mmci_host *host);
> +void mmci_ux500v2_variant_init(struct mmci_host *host);

Drop the "mmci_" prefix.

> +
> #ifdef CONFIG_MMC_QCOM_DML
> void qcom_variant_init(struct mmci_host *host);
> #else
> --
> 2.7.4
>

Kind regards
Uffe

\
 
 \ /
  Last update: 2019-03-21 17:57    [W:0.094 / U:28.988 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site