lkml.org 
[lkml]   [2019]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
SubjectRe: [PATCH 3/4] ARM: dts: da850-evm: enable cpufreq
czw., 21 mar 2019 o 16:53 David Lechner <david@lechnology.com> napisał(a):
>
> On 3/21/19 9:10 AM, Bartosz Golaszewski wrote:
> > From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> >
> > Enable cpufreq-dt support for da850-evm. The cvdd regulator is fixed
> > at 1.2V on this board so disable the lower operating points and enable
> > the 375MHz opp.
>
>
> The board-da850-evm.c file seems to indicate that this regulator is
> variable and comes from the tps65070. This regulator seems to be missing
> from the device tree though, even though it has device tree bindings.
>

Oh snap, you're right. I glanced over the 1.2V comment and thought
it's the same as other boards, but actually it specifies: .min_uV =
950000, .max_uV = 1350000, so all the operating points should work on
that one.

Bart

> Cc: Adam Ford
>
>
> >
> > Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> > ---
> > arch/arm/boot/dts/da850-evm.dts | 30 ++++++++++++++++++++++++++++++
> > 1 file changed, 30 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
> > index f04bc3e15332..f63867692da4 100644
> > --- a/arch/arm/boot/dts/da850-evm.dts
> > +++ b/arch/arm/boot/dts/da850-evm.dts
> > @@ -151,6 +151,15 @@
> > system-clock-frequency = <24576000>;
> > };
> > };
> > +
> > + cvdd: regulator0 {
> > + compatible = "regulator-fixed";
> > + regulator-name = "cvdd";
> > + regulator-min-microvolt = <1200000>;
> > + regulator-max-microvolt = <1200000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > };
> >
> > &ecap2 {
> > @@ -191,6 +200,27 @@
> > };
> > };
> >
> > +&cpu {
> > + cpu-supply = <&cvdd>;
> > +};
> > +
> > +/*
> > + * DA850-EVM has a fixed CVDD of 1.2V - we cannot go below 300MHz or
> > + * above 375MHz.
> > + */
> > +
> > +&opp_100 {
> > + status = "disabled";
> > +};
> > +
> > +&opp_200 {
> > + status = "disabled";
> > +};
> > +
> > +&opp_375 {
> > + status = "okay";
> > +};
> > +
> > &sata {
> > status = "okay";
> > };
> >
>

\
 
 \ /
  Last update: 2019-03-21 17:36    [W:0.055 / U:5.528 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site