lkml.org 
[lkml]   [2019]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] arm64: dts: rockchip: add rk3399 UART DMAs
From
Date
Hello Robin,

On 2019/03/22 0:21, Robin Murphy wrote:
> On 21/03/2019 14:40, Katsuhiro Suzuki wrote:
>> Add UART dma channels as specified by the rk3399 TRM.
>
> No UART4? That's arguably one of the more useful ones, since 1 and 3
> often end up muxed to ethernet instead.
>

Oops... I forgot to add for UART4. Thank you for pointing out.


> Also, does UART DMA actually work yet? I guess I can try for myself once
> I get home, but I remember last time I looked it was bailing out because
> the 8250 driver wanted a dmaengine feature that the pl330 driver didn't
> implement.
>

I think it works correctly. Because pl330_irq_handler() that is
IRQ handler of PL330 is called when my patch applied and handler
is not called if not applied.


Best Regards,
Katsuhiro Suzuki

> Robin.
>
>> Refer:
>> RK3399 TRM V1.4: Chapter 12 DMA Controller
>>
>> Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
>> ---
>>   arch/arm64/boot/dts/rockchip/rk3399.dtsi | 8 ++++++++
>>   1 file changed, 8 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>> b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>> index 0301e3e01b38..4eed7aae6989 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>> @@ -635,6 +635,8 @@
>>           clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
>>           clock-names = "baudclk", "apb_pclk";
>>           interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>;
>> +        dmas = <&dmac_peri 0>, <&dmac_peri 1>;
>> +        dma-names = "tx", "rx";
>>           reg-shift = <2>;
>>           reg-io-width = <4>;
>>           pinctrl-names = "default";
>> @@ -648,6 +650,8 @@
>>           clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
>>           clock-names = "baudclk", "apb_pclk";
>>           interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH 0>;
>> +        dmas = <&dmac_peri 2>, <&dmac_peri 3>;
>> +        dma-names = "tx", "rx";
>>           reg-shift = <2>;
>>           reg-io-width = <4>;
>>           pinctrl-names = "default";
>> @@ -661,6 +665,8 @@
>>           clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
>>           clock-names = "baudclk", "apb_pclk";
>>           interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>;
>> +        dmas = <&dmac_peri 4>, <&dmac_peri 5>;
>> +        dma-names = "tx", "rx";
>>           reg-shift = <2>;
>>           reg-io-width = <4>;
>>           pinctrl-names = "default";
>> @@ -674,6 +680,8 @@
>>           clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
>>           clock-names = "baudclk", "apb_pclk";
>>           interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>;
>> +        dmas = <&dmac_peri 6>, <&dmac_peri 7>;
>> +        dma-names = "tx", "rx";
>>           reg-shift = <2>;
>>           reg-io-width = <4>;
>>           pinctrl-names = "default";
>>
>

\
 
 \ /
  Last update: 2019-03-21 17:15    [W:0.049 / U:2.720 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site