lkml.org 
[lkml]   [2019]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH V3 05/10] arm64: tegra: fix default tap and trim values
Date
> >
> > Default tap and trim values are incorrect for Tegra186 SDMMC4.
> > This patch fixes it.
> >
> > Tested-by: Jon Hunter <jonathanh@nvidia.com>
> > Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>
> Is this a fix and/or for stable?
>
> In either case, I am leaving this for arm-soc.
>
> Kind regards
> Uffe
>

Thanks Uffe. Yes this is applicable for stable.

> > ---
> > arch/arm64/boot/dts/nvidia/tegra186.dtsi | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
> > b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
> > index 97aeb946ed5e..472f55fe9488 100644
> > --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
> > +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
> > @@ -317,8 +317,8 @@
> > nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x0a>;
> > nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x0a>;
> > nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x0a>;
> > - nvidia,default-tap = <0x5>;
> > - nvidia,default-trim = <0x9>;
> > + nvidia,default-tap = <0x9>;
> > + nvidia,default-trim = <0x5>;
> > nvidia,dqs-trim = <63>;
> > mmc-hs400-1_8v;
> > status = "disabled";
> > --
> > 2.7.4
> >
\
 
 \ /
  Last update: 2019-03-21 16:23    [W:0.100 / U:32.968 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site