lkml.org 
[lkml]   [2019]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC PATCH nand-next 0/2] meson-nand: support for older SoCs
From
Date
Hi Martin,

On 2019/3/21 4:48, Martin Blumenstingl wrote:
> Hi Liang,
>
> On Wed, Mar 20, 2019 at 4:32 AM Liang Yang <liang.yang@amlogic.com> wrote:
>>
>> Hi Martin,
>>
>> Thanks for your time.
>> On 2019/3/20 4:27, Martin Blumenstingl wrote:
>>> Hello Liang,
>>>
>>> On Sat, Mar 16, 2019 at 11:55 AM Martin Blumenstingl
>>> <martin.blumenstingl@googlemail.com> wrote:
>>> [...]
>
>> Allocating a fixed size info buffer before nand_scan_ident and attach it
>> on the struct meson_nfc; Or considering not use dma for reading data
>> less than 8 bytes. Both can reduce kmalloc and kfree calling. Thanks.
> both suggestions sound reasonable.
> however, I will search for the root cause of the unaligned address
> first before changing the Meson NFC driver.
That is good. And i will implement one of both mentioned above soon.
>
> [...]
>>> [ 2.227374] ------------[ cut here ]------------
>>> [ 2.231968] WARNING: CPU: 1 PID: 1 at
>>> drivers/mtd/nand/raw/nand_base.c:5503 nand_scan_with_ids+0x1718/0x171c
>>> [ 2.241760] No oob scheme defined for oobsize 1280
>>> ...
>>> (the "No oob scheme defined for oobsize 1280" message is expected)
>>>
>> miss mtd_set_ooblayout(mtd, &meson_ooblayout_ops) on function
>> meson_nand_attach_chip.
> thank you for the suggestion. I didn't have time to test this on my
> board yet but I'll let you know about my results during the weekend.
> Does the missing mtd_set_ooblayout() call also affect GXL or AXG boards?
>
Yes. I deleted it unintentionally.
>
> Regards
> Martin
>
> .
>

\
 
 \ /
  Last update: 2019-03-21 13:10    [W:0.063 / U:0.028 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site