lkml.org 
[lkml]   [2019]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4] arm64: dts: fsl: imx8mq: enable the multi sensor TMU
On Thu, Mar 21, 2019 at 05:52:52AM -0700, Angus Ainslie (Purism) wrote:
> Add the imx8mq TMU (Thermal management unit) nodes for CPU,
> GPU, and VPU.
>
> Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>

Subject prefix 'arm64: dts: imx8mq:' would be good enough. I changed it
and applied patch.

Shawn

> ---
>
> Changes since v3:
>
> Moved the annotation.
>
> Changes since v2:
>
> Updated alert and critical temps for commercial parts.
> Fixed node names.
>
> Changes since v1:
>
> Removed references to multi sensor patch.
>
> arch/arm64/boot/dts/freescale/imx8mq.dtsi | 118 ++++++++++++++++++++++
> 1 file changed, 118 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index b39c6c75c043..81d5ce1b1ec1 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -8,6 +8,7 @@
> #include <dt-bindings/power/imx8mq-power.h>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/thermal/thermal.h>
> #include "imx8mq-pinfunc.h"
>
> / {
> @@ -89,6 +90,7 @@
> reg = <0x0>;
> enable-method = "psci";
> next-level-cache = <&A53_L2>;
> + #cooling-cells = <2>;
> };
>
> A53_1: cpu@1 {
> @@ -97,6 +99,7 @@
> reg = <0x1>;
> enable-method = "psci";
> next-level-cache = <&A53_L2>;
> + #cooling-cells = <2>;
> };
>
> A53_2: cpu@2 {
> @@ -105,6 +108,7 @@
> reg = <0x2>;
> enable-method = "psci";
> next-level-cache = <&A53_L2>;
> + #cooling-cells = <2>;
> };
>
> A53_3: cpu@3 {
> @@ -113,6 +117,7 @@
> reg = <0x3>;
> enable-method = "psci";
> next-level-cache = <&A53_L2>;
> + #cooling-cells = <2>;
> };
>
> A53_L2: l2-cache0 {
> @@ -210,6 +215,119 @@
> #interrupt-cells = <2>;
> };
>
> + tmu: tmu@30260000 {
> + compatible = "fsl,imx8mq-tmu";
> + reg = <0x30260000 0x10000>;
> + interrupt = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
> + little-endian;
> + fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
> + fsl,tmu-calibration = <0x00000000 0x00000023
> + 0x00000001 0x00000029
> + 0x00000002 0x0000002f
> + 0x00000003 0x00000035
> + 0x00000004 0x0000003d
> + 0x00000005 0x00000043
> + 0x00000006 0x0000004b
> + 0x00000007 0x00000051
> + 0x00000008 0x00000057
> + 0x00000009 0x0000005f
> + 0x0000000a 0x00000067
> + 0x0000000b 0x0000006f
> +
> + 0x00010000 0x0000001b
> + 0x00010001 0x00000023
> + 0x00010002 0x0000002b
> + 0x00010003 0x00000033
> + 0x00010004 0x0000003b
> + 0x00010005 0x00000043
> + 0x00010006 0x0000004b
> + 0x00010007 0x00000055
> + 0x00010008 0x0000005d
> + 0x00010009 0x00000067
> + 0x0001000a 0x00000070
> +
> + 0x00020000 0x00000017
> + 0x00020001 0x00000023
> + 0x00020002 0x0000002d
> + 0x00020003 0x00000037
> + 0x00020004 0x00000041
> + 0x00020005 0x0000004b
> + 0x00020006 0x00000057
> + 0x00020007 0x00000063
> + 0x00020008 0x0000006f
> +
> + 0x00030000 0x00000015
> + 0x00030001 0x00000021
> + 0x00030002 0x0000002d
> + 0x00030003 0x00000039
> + 0x00030004 0x00000045
> + 0x00030005 0x00000053
> + 0x00030006 0x0000005f
> + 0x00030007 0x00000071>;
> + #thermal-sensor-cells = <1>;
> + };
> +
> + thermal-zones {
> + cpu-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <2000>;
> + thermal-sensors = <&tmu 0>;
> +
> + trips {
> + cpu_alert: cpu-alert {
> + temperature = <80000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu-crit {
> + temperature = <90000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> +
> + cooling-maps {
> + map0 {
> + trip = <&cpu_alert>;
> + cooling-device =
> + <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> + };
> +
> + gpu-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <2000>;
> + thermal-sensors = <&tmu 1>;
> +
> + trips {
> + gpu-crit {
> + temperature = <90000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + vpu-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <2000>;
> + thermal-sensors = <&tmu 2>;
> +
> + trips {
> + vpu-crit {
> + temperature = <90000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + };
> + };
> +
> wdog1: watchdog@30280000 {
> compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt";
> reg = <0x30280000 0x10000>;
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2019-03-22 03:12    [W:0.207 / U:6.028 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site