[lkml]   [2019]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH] Add I2C recovery handling for bcm-iproc based devices.
This patch adds I2C bus recovery support to the bcm-iproc I2C driver.
use the existing generic recovery mechanism by providing the hooks needed
to get and set the SCL and SDA lines.

The device must be placed in bit-bang mode before recovery starts and
returned to normal operation when complete.

Richard Laing (1):
Add i2c recovery handling for bcm-iproc based devices.

drivers/i2c/busses/i2c-bcm-iproc.c | 120 +++++++++++++++++++++++++++++++++++++
1 file changed, 120 insertions(+)


 \ /
  Last update: 2019-03-22 00:37    [W:0.060 / U:3.692 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site