lkml.org 
[lkml]   [2019]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Regression causes a hang on boot with a Comtrol PCI card
On Thu, Mar 14, 2019 at 03:57:07PM -0500, Jesse Hathaway wrote:
> > > 1302fcf0d03e (refs/bisect/bad) PCI: Configure *all* devices, not just
> > > hot-added ones
> > > 1c3c5eab1715 sched/core: Enable might_sleep() and smp_processor_id()
> > > checks early
> >
> > How did you narrow it down to *two* commits, and do you have to revert
> > both of them to avoid the hang? Usually a bisection identifies a
> > single commit, and the two you mention aren't related.
>
> Sorry I should have been more verbose in what the bisection process was, I
> found the problem after attempting to upgrade from linux v3.16 to v4.9. When
> v4.9 hung I tried the latest kernel, v5.0, which also hanged. I began a git
> bisect, but found there was more than one bad commit. Here is my current
> understanding:
>
> - [x] v3.18 vanilla, 1302fcf0d03e committed, hangs
> - [x] v3.18 with revert of 1302fcf0d03e, works
> .
> .
> .
> - [x] v4.12 vanilla, hangs
> - [x] v4.12 with revert of 1302fcf0d03e, works
>
> - [x] v4.13 vanilla, 1c3c5eab1715 committed, hangs
> - [x] v4.13 with revert of 1302fcf0d03e, hangs
> - [x] v4.13 with revert of 1c3c5eab1715, hangs
> - [x] v4.13 with revert of 1302fcf0d03e & 1c3c5eab1715, works
>
> - [x] v5.0 vanilla, hangs
> - [x] v5.0 with revert of 1302fcf0d03e & 1c3c5eab1715, works

Thanks! I doubt either of those commits is the real problem, but
they're both related to system_state, so it's conceivable they're both
involved in exposing the problem.

> > Can you collect a complete dmesg log (with a working kernel) and
> > output of "sudo lspci -vvxxx"? You can open a bug report at
> > https://bugzilla.kernel.org, attach the logs there, and respond here
> > with the URL.
>
> Bug submitted along with the requested logs,
> https://bugzilla.kernel.org/show_bug.cgi?id=202927

Thanks for that.

> > Where does the hang happen? Is it when we configure the Comtrol card?
>
> Hang occurs after PCI is initialized, snippet below, I have included the full
> output in the bug report:
>
> [ 10.561971] pci 0000:81:00.0: bridge window [mem 0xc8000000-0xc80fffff]
> [ 10.569661] pci 0000:80:01.0: PCI bridge to [bus 81-82]
> [ 10.575594] pci 0000:80:01.0: bridge window [mem 0xc8000000-0xc80fffff]
> [ 10.583278] pci 0000:80:03.0: PCI bridge to [bus 83]
> [ 10.589008] NET: Registered protocol family 2
> [ 10.594254] tcp_listen_portaddr_hash hash table entries: 65536
> (order: 8, 1048576 bytes)
> [ 10.603671] TCP established hash table entries: 524288 (order: 10,
> 4194304 bytes)
> [ 10.612729] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> [ 10.620446] TCP: Hash tables configured (established 524288 bind 65536)
> [ 10.628124] UDP hash table entries: 65536 (order: 9, 2097152 bytes)
> [ 10.635541] UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes)
> [ 10.643669] NET: Registered protocol family 1

The successful boot continues on with this:

[ 10.675996] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6a0 took 22519 usecs
[ 10.684519] pci 0000:03:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD for)
[ 10.696404] pci 0000:03:00.0: quirk_blacklist_vpd+0x0/0x30 took 11605 usecs
[ 10.704515] pci 0000:0b:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]

So apparently the hang happens while we're running the "final" PCI
fixups. This happens after all the rest of PCI is initialized.

Can you boot v5.0 vanilla with "initcall_debug"? Maybe we can narrow
it down to a specific quirk.

Bjorn

\
 
 \ /
  Last update: 2019-03-22 00:23    [W:0.086 / U:6.060 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site