lkml.org 
[lkml]   [2019]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 09/12] usb: dwc3: Registering a role switch in the DRD code.
Date
The Type-C drivers use USB role switch API to inform the
system about the negotiated data role, so registering a role
switch in the DRD code in order to support platforms with
USB Type-C connectors.

Cc: Jun Li <lijun.kernel@gmail.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
v2:
* Assign fwnode in dwc3_role_switch.
v3:
* Add default mode property for usb role switch.
* Add select USB_ROLE_SWITCH for USB_DWC3_DUAL_ROLE in Kconfig.
* Do usb_role_switch_register only if property "usb-role-switch" present.
---
---
drivers/usb/dwc3/Kconfig | 1 +
drivers/usb/dwc3/core.h | 3 +++
drivers/usb/dwc3/drd.c | 58 +++++++++++++++++++++++++++++++++++++++++++++++-
3 files changed, 61 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 1a0404fda596..3a0cb9f1f38a 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -42,6 +42,7 @@ config USB_DWC3_DUAL_ROLE
bool "Dual Role mode"
depends on ((USB=y || USB=USB_DWC3) && (USB_GADGET=y || USB_GADGET=USB_DWC3))
depends on (EXTCON=y || EXTCON=USB_DWC3)
+ select USB_ROLE_SWITCH
help
This is the default mode of working of DWC3 controller where
both host and gadget features are enabled.
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 402b3c29eb26..b2b0da007bff 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -25,6 +25,7 @@
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/usb/otg.h>
+#include <linux/usb/role.h>
#include <linux/ulpi/interface.h>

#include <linux/phy/phy.h>
@@ -1083,6 +1084,8 @@ struct dwc3 {
struct extcon_dev *edev;
struct notifier_block edev_nb;
enum usb_phy_interface hsphy_mode;
+ struct usb_role_switch *role_sw;
+ enum usb_dr_mode role_switch_default_mode;

u32 fladj;
u32 irq_gadget;
diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
index 869725d15c74..5bfea03233d7 100644
--- a/drivers/usb/dwc3/drd.c
+++ b/drivers/usb/dwc3/drd.c
@@ -474,6 +474,43 @@ static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
return edev;
}

+static int dwc3_usb_role_switch_set(struct device *dev, enum usb_role role)
+{
+ struct dwc3 *dwc = dev_get_drvdata(dev);
+ u32 mode;
+
+ switch (role) {
+ case USB_ROLE_HOST:
+ mode = DWC3_GCTL_PRTCAP_HOST;
+ break;
+ case USB_ROLE_DEVICE:
+ mode = DWC3_GCTL_PRTCAP_DEVICE;
+ break;
+ default:
+ if (dwc->role_switch_default_mode == USB_DR_MODE_HOST)
+ mode = DWC3_GCTL_PRTCAP_HOST;
+ else
+ mode = DWC3_GCTL_PRTCAP_DEVICE;
+ break;
+ }
+
+ dwc3_set_mode(dwc, mode);
+ return 0;
+}
+
+static enum usb_role dwc3_usb_role_switch_get(struct device *dev)
+{
+ struct dwc3 *dwc = dev_get_drvdata(dev);
+ unsigned long flags;
+ enum usb_role role;
+
+ spin_lock_irqsave(&dwc->lock, flags);
+ role = dwc->current_otg_role;
+ spin_unlock_irqrestore(&dwc->lock, flags);
+
+ return role;
+}
+
int dwc3_drd_init(struct dwc3 *dwc)
{
int ret, irq;
@@ -482,7 +519,23 @@ int dwc3_drd_init(struct dwc3 *dwc)
if (IS_ERR(dwc->edev))
return PTR_ERR(dwc->edev);

- if (dwc->edev) {
+ if (device_property_read_bool(dwc->dev, "usb-role-switch")) {
+ struct usb_role_switch_desc dwc3_role_switch = {0};
+
+ if (device_property_read_bool(dwc->dev,
+ "role-switch-default-host"))
+ dwc->role_switch_default_mode = USB_DR_MODE_HOST;
+ else
+ dwc->role_switch_default_mode = USB_DR_MODE_PERIPHERAL;
+
+ dwc3_role_switch.fwnode = dev_fwnode(dwc->dev);
+ dwc3_role_switch.set = dwc3_usb_role_switch_set;
+ dwc3_role_switch.get = dwc3_usb_role_switch_get;
+ dwc->role_sw = usb_role_switch_register(dwc->dev,
+ &dwc3_role_switch);
+ if (IS_ERR(dwc->role_sw))
+ return PTR_ERR(dwc->role_sw);
+ } else if (dwc->edev) {
dwc->edev_nb.notifier_call = dwc3_drd_notifier;
ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST,
&dwc->edev_nb);
@@ -529,6 +582,9 @@ void dwc3_drd_exit(struct dwc3 *dwc)
{
unsigned long flags;

+ if (dwc->role_sw)
+ usb_role_switch_unregister(dwc->role_sw);
+
if (dwc->edev)
extcon_unregister_notifier(dwc->edev, EXTCON_USB_HOST,
&dwc->edev_nb);
--
2.15.0-rc2
\
 
 \ /
  Last update: 2019-03-02 10:06    [W:0.103 / U:0.948 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site