[lkml]   [2019]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH 0/2] clk: meson8b: add the video decoder clocks
This adds the video decoder clocks for Meson8, Meson8b and Meson8m2.

The clock tree on Meson8 differs from the one one Meson8b and Meson8m2.
Details can be found in patch #2.

There are some checkpatch warnings in patch #2:
WARNING: please, no space before tabs
I decided to still send the patch because we have the same inconsistency
with all other clk_hw_onecell_data table entries. Please let me know if
I should come up with a follow-up patch to clean them all up.

I have not tested this with Maxime's video decoder driver yet.
However, I manually enabled and set various frequencies for the HCODEC
clock and verified that clkmsr reports the correct rate.

This is meant to be applied on top of my other series from [0]:
clk: meson8b: add the VPU clock tree


Martin Blumenstingl (2):
dt-bindings: clock: meson8b: export the video decoder clocks
clk: meson: meson8b: add the video decoder clock trees

drivers/clk/meson/meson8b.c | 312 +++++++++++++++++++++++
drivers/clk/meson/meson8b.h | 17 +-
include/dt-bindings/clock/meson8b-clkc.h | 4 +
3 files changed, 332 insertions(+), 1 deletion(-)


 \ /
  Last update: 2019-03-19 23:00    [W:0.081 / U:18.828 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site