lkml.org 
[lkml]   [2019]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v4 1/4] drm: rockchip: introduce rk3066 hdmi
Date
Hi Johan,

Am Mittwoch, 6. März 2019, 23:41:10 CET schrieb Johan Jonker:
> From: Zheng Yang <zhengyang@rock-chips.com>
>
> The RK3066 HDMI TX serves as interface between a LCD Controller and
> a HDMI bus. A HDMI TX consists of one HDMI transmitter controller and
> one HDMI transmitter PHY. The interface has three (3) 8-bit data channels
> which can be configured for a number of bus widths (8/10/12/16/20/24-bit)
> and different video formats (RGB, YCbCr).
>
> Features:
> HDMI version 1.4a, HDCP revision 1.4 and
> DVI version 1.0 compliant transmitter.
> Supports DTV resolutions from 480i to 1080i/p HD.
> Master I2C interface for a DDC connection.
> HDMI TX supports multiple power save modes.
> The HDMI TX input can switch between LCDC0 and LCDC1.
> (Sound support is not included in this patch)
>
> Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
> Signed-off-by: Johan Jonker <jbx6244@gmail.com>

Looks good in general, but there are some minor things to improve yet,
please see below for specifics.

[...]

> +static void rk3066_hdmi_config_phy(struct rk3066_hdmi *hdmi)
> +{
> + /* TMDS uses the same frequency as dclk. */
> + hdmi_writeb(hdmi, HDMI_DEEP_COLOR_MODE, 0x22);

These magic values below are no fault of yours, but in any case this
could use a comment that the semi-public documentation does not
describe hdmi-registers at all, so we're stuck with these magic-values
for now.

> + if (hdmi->tmdsclk > 100000000) {
> + rk3066_hdmi_phy_write(hdmi, 0x158, 0x0E);
> + rk3066_hdmi_phy_write(hdmi, 0x15c, 0x00);
> + rk3066_hdmi_phy_write(hdmi, 0x160, 0x60);
> + rk3066_hdmi_phy_write(hdmi, 0x164, 0x00);
> + rk3066_hdmi_phy_write(hdmi, 0x168, 0xDA);
> + rk3066_hdmi_phy_write(hdmi, 0x16c, 0xA1);
> + rk3066_hdmi_phy_write(hdmi, 0x170, 0x0e);
> + rk3066_hdmi_phy_write(hdmi, 0x174, 0x22);
> + rk3066_hdmi_phy_write(hdmi, 0x178, 0x00);
> + } else if (hdmi->tmdsclk > 50000000) {
> + rk3066_hdmi_phy_write(hdmi, 0x158, 0x06);
> + rk3066_hdmi_phy_write(hdmi, 0x15c, 0x00);
> + rk3066_hdmi_phy_write(hdmi, 0x160, 0x60);
> + rk3066_hdmi_phy_write(hdmi, 0x164, 0x00);
> + rk3066_hdmi_phy_write(hdmi, 0x168, 0xCA);
> + rk3066_hdmi_phy_write(hdmi, 0x16c, 0xA3);
> + rk3066_hdmi_phy_write(hdmi, 0x170, 0x0e);
> + rk3066_hdmi_phy_write(hdmi, 0x174, 0x20);
> + rk3066_hdmi_phy_write(hdmi, 0x178, 0x00);
> + } else {
> + rk3066_hdmi_phy_write(hdmi, 0x158, 0x02);
> + rk3066_hdmi_phy_write(hdmi, 0x15c, 0x00);
> + rk3066_hdmi_phy_write(hdmi, 0x160, 0x60);
> + rk3066_hdmi_phy_write(hdmi, 0x164, 0x00);
> + rk3066_hdmi_phy_write(hdmi, 0x168, 0xC2);
> + rk3066_hdmi_phy_write(hdmi, 0x16c, 0xA2);
> + rk3066_hdmi_phy_write(hdmi, 0x170, 0x0e);
> + rk3066_hdmi_phy_write(hdmi, 0x174, 0x20);
> + rk3066_hdmi_phy_write(hdmi, 0x178, 0x00);
> + }
> +}

> +static void rk3066_hdmi_encoder_enable(struct drm_encoder *encoder)
> +{
> + struct rk3066_hdmi *hdmi = to_rk3066_hdmi(encoder);
> + int mux, val;
> +
> + mux = drm_of_encoder_active_endpoint_id(hdmi->dev->of_node, encoder);
> + if (mux)
> + val = BIT(30) | BIT(14);
> + else
> + val = BIT(30);
> +
> + regmap_write(hdmi->grf, 0x150, val);


Please define constants for both BIT(14) and the 0x150 GRF register,
which is GRF_SOC_CON0, so in the header

#define GRF_SOC_CON0 0x150
#define HDMI_VIDEO_SEL BIT(14)

and then do
if (mux)
val = (HDMI_VIDEO_SEL << 16) | HDMI_VIDEO_SEL;
else
val = HDMI_VIDEO_SEL << 16;

regmap_write(hdmi->grf, GRF_SOC_CON0, val);

> +
> + dev_dbg(hdmi->dev, "hdmi encoder enable select: vop%s\n",
> + (mux) ? "1" : "0");
> +
> + rk3066_hdmi_setup(hdmi, &hdmi->previous_mode);
> +}
> +


> +static const struct drm_display_mode edid_cea_modes[] = {
> + /* 4 - 1280x720@60Hz 16:9 */
> + { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 74250, 1280, 1390,
> + 1430, 1650, 0, 720, 725, 730, 750, 0,
> + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC),
> + .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
> +};

please drop that, see below

> +static int rk3066_hdmi_connector_get_modes(struct drm_connector *connector)
> +{
> + struct rk3066_hdmi *hdmi = to_rk3066_hdmi(connector);
> + struct drm_display_mode *mode = NULL;
> + struct edid *edid;
> + int ret = 0;
> +
> + if (!hdmi->ddc)
> + return 0;
> +
> + hdmi->hdmi_data.sink_is_hdmi = false;
> +
> + edid = drm_get_edid(connector, hdmi->ddc);
> + if (edid) {
> + hdmi->hdmi_data.sink_is_hdmi = drm_detect_hdmi_monitor(edid);
> +
> + dev_info(hdmi->dev, "monitor type : %s : %dx%d cm\n",
> + (hdmi->hdmi_data.sink_is_hdmi ? "HDMI" : "DVI"),
> + edid->width_cm, edid->height_cm);
> +
> + drm_connector_update_edid_property(connector, edid);
> + ret = drm_add_edid_modes(connector, edid);
> + kfree(edid);
> + }
> +
> + if ((ret == 0) || (hdmi->hdmi_data.sink_is_hdmi == false)) {
> + hdmi->hdmi_data.sink_is_hdmi = false;
> +
> + mode = drm_mode_duplicate(hdmi->drm_dev, &edid_cea_modes[0]);
> + if (!mode)
> + return ret;
> + mode->type |= DRM_MODE_TYPE_PREFERRED;
> + drm_mode_probed_add(connector, mode);
> + ret++;
> +
> + dev_info(hdmi->dev, "no CEA mode found, use default\n");

This is a hack from the vendor-kernel.

If EDID reading fails, it is some sort of issue with the driver, so we
shouldn't assume any specific mode at all. See the somewhat similar
inno_hdmi driver for comparison.


> + }
> +
> + return ret;
> +}
> +



> +static int
> +rk3066_hdmi_register(struct drm_device *drm, struct rk3066_hdmi *hdmi)
> +{
> + struct drm_encoder *encoder = &hdmi->encoder;
> + struct device *dev = hdmi->dev;
> +
> + encoder->possible_crtcs =
> + drm_of_find_possible_crtcs(drm, dev->of_node);
> +
> + /*
> + * If we failed to find the VOP(s) which this encoder is
> + * supposed to be connected to, it's because the VOP has
> + * not been registered yet. Defer probing, and hope that
> + * the required VOP is added later.
> + */
> + if (encoder->possible_crtcs == 0)
> + return -EPROBE_DEFER;
> +
> + dev_info(hdmi->dev, "VOP found\n");

unnecessary output which will clutter up the kernel log, please drop.

> +
> + drm_encoder_helper_add(encoder, &rk3066_hdmi_encoder_helper_funcs);
> + drm_encoder_init(drm, encoder, &rk3066_hdmi_encoder_funcs,
> + DRM_MODE_ENCODER_TMDS, NULL);
> +
> + hdmi->connector.polled = DRM_CONNECTOR_POLL_HPD;
> +
> + drm_connector_helper_add(&hdmi->connector,
> + &rk3066_hdmi_connector_helper_funcs);
> + drm_connector_init(drm, &hdmi->connector,
> + &rk3066_hdmi_connector_funcs,
> + DRM_MODE_CONNECTOR_HDMIA);
> +
> + drm_connector_attach_encoder(&hdmi->connector, encoder);
> +
> + return 0;
> +}
> +
> +static irqreturn_t rk3066_hdmi_i2c_irq(struct rk3066_hdmi *hdmi, u8 stat)
> +{
> + struct rk3066_hdmi_i2c *i2c = hdmi->i2c;
> +
> + if (!(stat & HDMI_INTR_EDID_MASK))
> + return IRQ_NONE;
> +
> + i2c->stat = stat;
> +
> + complete(&i2c->compl);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t rk3066_hdmi_hardirq(int irq, void *dev_id)
> +{
> + struct rk3066_hdmi *hdmi = dev_id;
> + irqreturn_t ret = IRQ_NONE;
> + u8 interrupt;
> +
> + if (rk3066_hdmi_get_power_mode(hdmi) == HDMI_SYS_POWER_MODE_A)
> + hdmi_writeb(hdmi, HDMI_SYS_CTRL, HDMI_SYS_POWER_MODE_B);
> +
> + interrupt = hdmi_readb(hdmi, HDMI_INTR_STATUS1);
> + if (interrupt)
> + hdmi_writeb(hdmi, HDMI_INTR_STATUS1, interrupt);
> +
> + if (hdmi->i2c)
> + ret = rk3066_hdmi_i2c_irq(hdmi, interrupt);

I think you don't really need that rk3066_hdmi_i2c_irq function above,
this can just become

if (interrupt & HDMI_INTR_EDID_MASK) {
hdmi->i2c->stat = stat;
complete(&hdmi->i2c->compl);
}

hdmi->i2c is set through rk3066_hdmi_i2c_adapter() which is always called
and needs to be sucessful before registering the interrupt, so there is
no need to check for hdmi->i2c here at all.


> +
> + if (interrupt & (HDMI_INTR_HOTPLUG | HDMI_INTR_MSENS))
> + ret = IRQ_WAKE_THREAD;
> +
> + return ret;
> +}
> +





> +static struct i2c_adapter *rk3066_hdmi_i2c_adapter(struct rk3066_hdmi *hdmi)
> +{
> + struct i2c_adapter *adap;
> + struct rk3066_hdmi_i2c *i2c;
> + int ret;
> +
> + i2c = devm_kzalloc(hdmi->dev, sizeof(*i2c), GFP_KERNEL);
> + if (!i2c)
> + return ERR_PTR(-ENOMEM);
> +
> + mutex_init(&i2c->i2c_lock);
> + init_completion(&i2c->compl);
> +
> + adap = &i2c->adap;
> + adap->class = I2C_CLASS_DDC;
> + adap->owner = THIS_MODULE;
> + adap->dev.parent = hdmi->dev;
> + adap->dev.of_node = hdmi->dev->of_node;
> + adap->algo = &rk3066_hdmi_algorithm;
> + strlcpy(adap->name, "RK3066 HDMI", sizeof(adap->name));
> + i2c_set_adapdata(adap, hdmi);
> +
> + ret = i2c_add_adapter(adap);
> + if (ret) {
> + dev_warn(hdmi->dev, "cannot add %s I2C adapter\n", adap->name);
> + devm_kfree(hdmi->dev, i2c);
> + return ERR_PTR(ret);
> + }
> +
> + hdmi->i2c = i2c;
> +
> + dev_info(hdmi->dev, "registered %s I2C bus driver\n", adap->name);

Please drop or make it a DRM_DEV_DEBUG. Also, please convert all the
general dev_foobar calls to their DRM_* equivalents, so
dev_warn becomes DRM_DEV_ERROR, dev_info DRM_DEV_INFO and so on.


> + return adap;
> +}
> +
> +static int rk3066_hdmi_bind(struct device *dev, struct device *master,
> + void *data)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct drm_device *drm = data;
> + struct rk3066_hdmi *hdmi;
> + struct resource *iores;
> + int irq;
> + int ret;
> +
> + hdmi = devm_kzalloc(dev, sizeof(*hdmi), GFP_KERNEL);
> + if (!hdmi)
> + return -ENOMEM;
> +
> + hdmi->dev = dev;
> + hdmi->drm_dev = drm;
> +
> + iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!iores)
> + return -ENXIO;
> +
> + hdmi->regs = devm_ioremap_resource(dev, iores);
> + if (IS_ERR(hdmi->regs))
> + return PTR_ERR(hdmi->regs);
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq < 0)
> + return irq;
> +
> + hdmi->hclk = devm_clk_get(dev, "hclk");
> + if (IS_ERR(hdmi->hclk)) {
> + dev_err(dev, "unable to get HDMI hclk clock\n");
> + return PTR_ERR(hdmi->hclk);
> + }
> +
> + ret = clk_prepare_enable(hdmi->hclk);
> + if (ret) {
> + dev_err(dev, "cannot enable HDMI hclk clock: %d\n", ret);
> + return ret;
> + }
> +
> + hdmi->grf = syscon_regmap_lookup_by_phandle(dev->of_node,
> + "rockchip,grf");
> + if (IS_ERR(hdmi->grf)) {
> + dev_err(dev, "unable to get rockchip,grf\n");
> + ret = PTR_ERR(hdmi->grf);
> + goto err_disable_hclk;
> + }
> +
> + /* internal hclk = hdmi_hclk / 25 */
> + hdmi_writeb(hdmi, HDMI_INTERNAL_CLK_DIVIDER, 25);
> +
> + hdmi->ddc = rk3066_hdmi_i2c_adapter(hdmi);
> + if (IS_ERR(hdmi->ddc)) {
> + ret = PTR_ERR(hdmi->ddc);
> + hdmi->ddc = NULL;
> + goto err_disable_hclk;
> + }
> +
> + rk3066_hdmi_set_power_mode(hdmi, HDMI_SYS_POWER_MODE_B);
> + usleep_range(999, 1000);
> + hdmi_writeb(hdmi, HDMI_INTR_MASK1, HDMI_INTR_HOTPLUG);
> + hdmi_writeb(hdmi, HDMI_INTR_MASK2, 0);
> + hdmi_writeb(hdmi, HDMI_INTR_MASK3, 0);
> + hdmi_writeb(hdmi, HDMI_INTR_MASK4, 0);
> + rk3066_hdmi_set_power_mode(hdmi, HDMI_SYS_POWER_MODE_A);
> +
> + ret = rk3066_hdmi_register(drm, hdmi);
> + if (ret)
> + goto err_disable_hclk;

goto err_disable_i2c;

So that the i2c-adapter also gets disabled on error.

> + dev_set_drvdata(dev, hdmi);
> +
> + ret = devm_request_threaded_irq(dev, irq, rk3066_hdmi_hardirq,
> + rk3066_hdmi_irq, IRQF_SHARED,
> + dev_name(dev), hdmi);
> + if (ret) {
> + dev_err(dev, "failed to request hdmi irq: %d\n", ret);
> + goto err_disable_hclk;

goto err_disable_i2c;

> + }
> +
> + return 0;
> +

err_disable_i2c:
i2c_put_adapter(hdmi->ddc);

> +err_disable_hclk:
> + clk_disable_unprepare(hdmi->hclk);
> +
> + return ret;
> +}
> +
> +static void rk3066_hdmi_unbind(struct device *dev, struct device *master,
> + void *data)
> +{
> + struct rk3066_hdmi *hdmi = dev_get_drvdata(dev);
> +
> + hdmi->connector.funcs->destroy(&hdmi->connector);
> + hdmi->encoder.funcs->destroy(&hdmi->encoder);
> +
> + clk_disable_unprepare(hdmi->hclk);
> + i2c_put_adapter(hdmi->ddc);

you should probably invert the calling order here, first remove the
i2c adapter and only then disable the clock.


Thanks
Heiko


\
 
 \ /
  Last update: 2019-03-19 12:45    [W:0.076 / U:0.712 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site